0
What else can I help you with?
How does a fixed bore expansion device respond to a reduction in load?
How does a fixed bore expansion device respond to a reduction in load?
Is loading effect more when load impedance is less then source impedance?
The higher the mismatch between the load impedance and source impedance, the higher the loading effect.
Why are short time rating of transformer is high?
Because a transformer is a big lump of metal that takes time heat up, so if the load is on and off in a short time, the load rating can be exceeded.
What is a circuit with no load?
An open circuit or a short-circuit (if that circuit is complete).
What effect if load increase in electrical system?
when load on the electric system increase frequency of the system will decrease resulting in higher intake at powergenerators. If higher intake is not net by powergeneration stations entire power system will collapse. It is called grid failure.Another AnswerAn increase in load will result in an increase in load current.
How to find a microbial load?
To find the microbial load in a sample, you can perform microbiological testing methods such as plate counting, flow cytometry, or polymerase chain reaction (PCR). These methods help quantify the number of microorganisms present in the sample, providing information on the microbial load.
How does a fixed bore expansion device respond to a reduction in load?
How does a fixed bore expansion device respond to a reduction in load?
How do i calculate Biologic log reduction?
Microbial load (cfu/g or cfu/ml) can be expressed as log10. So, if you have 100,000 microbes that is 5 log, 10,000 microbes is 4 log, 1,000 is 3 log, 100 microbes is 2 log and 10 microbes is 1 log. Now, if you went from 100,000 microbes cfu/g to 10,000 microbes cfu/g that would be a 1 log reduction (5 - 4 log). If you went from 100,000 to 32,000 that would be a 0.5 log reduction (5 - 4.5 log) and so on. I hope this helps St John Hall
What is in milk to make it last longer?
Milk is pasteurized which reduces the microbial load. That makes it last longer.
Where is the load reduction relay 2003 vw jetta?
under the dashboard..
What is Stress reduction factor in UG excavations?
The stress reduction factor is a product of the relationship between the Unconfined compressive strength of a rock and the sigma 1, or principal stress field in that area. The higher the value, the more likely the rock is to deform when placed under load.
Is the word load have a short vowel sound?
Yes, the word "load" has a short vowel sound. The "o" in "load" is pronounced as a short vowel sound, like the "o" in "hot" or "dog."
Is the word load a short vowel sound?
Yes, the "o" in the word "load" is a short vowel sound.
What will give you an overvoltage on a three phase system?
Reduction of transient load and lightining strikes
How do you make a Overloading Electrical Circuits?
An overload occurs when the load current is higher than the nominal current rating of the conductor supplying the load. Over time, this can cause the insulation to break down and cause a short-circuit to occur between conductors.
Short for electrical engineer?
Short is short (no pun intended) for short circuit, which is a condition where unexpected current flows, often of much higher current than usual, because the load is often bypassed. Short circuit current flow can be as high as several hundred or several thousand amperes. Some people make the mistake of saying "there is a short" when they actually mean "there is an open". This comes from an intermittent connection that causes the load to not function. If there were a true short, there would be a big spark, possible fire, and the fuse or circuit breaker would blow.
Are no load and short circuit similar?
No. No load and short circuit is not similar. No load can be 1) Either open circuit i.e. Only Potential is available and load is not connected 2) Load (i.e. motor etc ) is connected but not working with full load or full capacity. In this case the current will flow through the circuit depending on the load. It means No load condition is a condition where no current or a small ( relative / comparative term) current is flowing through the circuit. In Short circuit the load side resistance/ impedance become so less that very high amount of current is passing through circuit.( The protection is therefor required for any circuit) No load and and short circuit is not similar. Thanks
