The frequency range of FM signal is 88hz to 108hz.
Frequency modulation is not used for long distance transmission because it has the problem of limited band width.
Modulation Index is the ratio of the maximum deviation frequency to the frequency of modulation. In other words it is the ratio of the spread in frequency spectrum to the frequency that was used to modulate the carrier. For FM, modulation index is given by the formula mf= df/f where, mf=modulation index for FM df=difference in carrier frequency f=frequency of the signal
the frequency range of an am wave is 20herz to 20kilo herz
In Frequency Modulation (FM), if the modulation frequency is doubled, the modulation index does not necessarily double; it depends on the amplitude of the modulating signal. In Amplitude Modulation (AM), the modulation index is defined as the ratio of the peak amplitude of the modulating signal to the carrier amplitude, so it remains unchanged with varying modulation frequency. For Phase Modulation (PM), similar to FM, the modulation index is influenced by the amplitude of the modulating signal and does not inherently double with the modulation frequency. Thus, modulation frequency and modulation index are not directly linked in this way for FM, PM, or AM.
Deviation ratio: In a frequency modulation system, the ratio of the maximum frequency deviation of the carrier to the maximum modulating frequency of the system under specified conditions
Normal frequency range for amplitude modulation is 550kHz to 1610kHz
Frequency modulation is not used for long distance transmission because it has the problem of limited band width.
modulation is necessary for transmitting low frequency signal to long range with desired qualitative information
FM means Frequency Modulated.FM stands for modulation on frequency or frequency modulation.
The difference between frequency modulation and phase modulation is that with frequency modulation the angular frequency of the signal is modified while with the phase modulation, the phase angle of the signal is modified.
AM - Amplitude Modulation FM - Frequency Modulation
Frequency modulation is used to broadcast radio waves to receivers. The most common use of it is in FM radio, which contains a range of radio frequencies.
Modulation Index is the ratio of the maximum deviation frequency to the frequency of modulation. In other words it is the ratio of the spread in frequency spectrum to the frequency that was used to modulate the carrier. For FM, modulation index is given by the formula mf= df/f where, mf=modulation index for FM df=difference in carrier frequency f=frequency of the signal
FM means frequency modulation AM means amplitude modulation
fc>2fm
frequency modulation..
a measure of the degree of frequency modulation expressed numerically for a pure tone modulation as the ratio of the frequency deviation to the frequency of the modulating signal.