answersLogoWhite

0

approx 170ft.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

What is difference between 500MW boiler 660MW boiler?

500 MW Boiler is sub-critical Boiler which generates steam at pressure lower than the critical pressure ie below 221.2 kg/sqcm. where as the 660 MW boiler is super critical boiler which operates steam pressure above critical pressure.


What is chimney height for 500 MW power plant?

350 m.


How many crops are needed to produce 500 MW of energy if you're using Bio fuels?

Using a boiler and turbine, the fuel consumption is about 0.3 pounds per horsepower per hour. So 500 MW would require about 90 tons of fuel each hour.


How do you find the current rating of a zener diode if the power rating is 500mw and a voltage rating of 10v?

A zener diode with a rating of 500 mW will pass 50 mA at 10 V. (Power = voltage times current)Note: The question appears mis stated, in that it states a rating of 500 MW, not 500 mW. To my knowledge, there is no zener with a rating of 500 MW.


How do you calculate coal consumption in afbc boiler?

how we calculate the coal consumed to generate xxx MW say 12 hrs or 24 hrs in CFBC boiler please help


How powerful is a 200mw laser pointer?

It is very powerful, falling into the "3B" class. Classes were determined by levels that can cause a lesion. The UltraViolet laser is far more dangerous than the visible laser. In the visible range, a continuous laser classes are: Class 1: up to 0.39 mW. Class 2: 0.39 mW to 1 mW. Class 3A: of 1 to 5 mW. Class 3B: 5 to 500 mW. Class 4: beyond 500 mW.


How do you convert boiler flow rate to boiler mw?

Boiler power is not determined in megawatts. A boiler horsepower is determined as 33000 btus. That is equivalent to 34.5 pounds of steam from and at 212 F. Conversion of boiler conditions (factor of evaporation) output and horsepower to atmospheric steam conditions is the norm for determining boiler horsepower. The ASME code contains several methods for determining boiler horsepower. Megawatts are a determination of turbine-generator output.


What is the Hight of stack of 500mw power plant?

The height of a stack in a 500 MW power plant can vary depending on the design and technology used. On average, the stack height for a power plant of this size could range from 50 to 150 meters. Regulations and environmental factors also influence the final height of the stack.


How much electricity does an average hydroelectric dam generate?

Although several large-scale dams can produce over 1000 MW, an average dam will produce anywhere from 80 MW to 500 MW. An average value for those would probably be about 200 MW.


What are the average prices for boilers?

The average price range for a new boiler can be in the region of $500 for a small, occasional use boiler to $4000 for combination and energy efficient boiler.


How big are wind turbine generators?

A 1.5 MW turbine is 80ms in height. A 3MW turbine is 90m in height. The world's largest-capacity turbine, the Enercon (7.58MW) is 198m in height.


How high from the ground is the blades of a 1 MW wind turbine?

The height of a 1 MW wind turbine rotor blade above the ground typically ranges between 150 to 200 feet. This height helps the blades capture more wind energy and generate electricity efficiently.