0
What else can I help you with?
How you can check load connected of transformer?
Measure the current and voltage on the secondary side.
What is purpose of demagnetizing test during current transformer test?
The residual magnetisation present in the current transformer coils may cause the errors during measurement of high currents. So that it is necessary to check that.
How do you check dc voltage... series or parallel?
If you are asking how a voltmeter should be connected in a circuit, then the answer is that it should be connected in parallel with the device across which you want to determine the voltage. This applies whether the circuit is d.c. or a.c.
What is the best method to check a unwanted resistance in a circuit?
Do not add any unwanted device in the circuit. Have correct sized wire for the application and the load current.
Why does your protective device keep tripping out?
Because something is wrong. Check for shorts and, if it is a GFCI, also check for ground faults and leakages. It is also possible, in the case of a GFCI, that an inappropriate load, such as a computer monitor or UPS, is connected. These devices pull transient power to ground and will trip a GFCI. Do not ignore the situation. The protective device is tripping for a reason.
How can you discover disconnected hardware or connected hardware to the motherboard without opening the case?
You can check what devices are connected in Device manager in windows.
How you can check load connected of transformer?
Measure the current and voltage on the secondary side.
How can you check to see if a fastEthernet interface on a router is connected to the fastEthernet interface on another network device?
Check the network card and the properties are listed there.
Why do you check gastric residual?
for placement
What is the process to check the status of a PRL update on my device?
To check the status of a PRL update on your device, go to the settings menu, select "About Phone" or "About Device," then choose "Software Update" or "System Update." Look for an option to check for updates, which will show the current status of the PRL update on your device.
What is purpose of demagnetizing test during current transformer test?
The residual magnetisation present in the current transformer coils may cause the errors during measurement of high currents. So that it is necessary to check that.
Can a gfci receptacle be tripped by a fluorescent light?
Yes, you can have current leakage with any device. Check the device with an ohm-meter with the POWER turned off. Unplug the device and check between the hot leads and the ground wire. It should be infinite readings. Check also from hot leads to device chassis or metal case.
When you open your computer the CD rom does not show but it opens and the light comes on?
Opening and light indicate that the device has power. Check it is correctly connected to the motherboard and that the latest device drivers are installed
How can you check to see if the fastethernet interface on a router is connected to the fastethernet on another networking device?
Smell the router to see if it's in heat.
Why cant you hear any sound in deckadance 2?
If you're not hearing any sound in Deckadance 2, check that your audio device is properly connected and set up in the software. Make sure the correct audio output device is selected in the Deckadance settings. Also, check that your speakers or headphones are working and properly connected to your computer.
How do you make a hardware storage device available?
Ensure it is properly connected, and that the software required to drive it is loaded. If necessary, remove it safely and then reconnect it. When it is connected, check its settings and select whatever is necessary.
How do you check the under voltage relay?
The way you check to see if an under voltage relay is wired properly is to disconnect the electrical supply. If the device that is connected to the load side of the relay does not start up or energize when the electrical supply is reconnected, then the relay is connected correctly.
