0
What else can I help you with?
How does a two-phase system differ from a three phase system?
A two-phase system is archaic and you are unlikely to find it in use anywhere these days, so it is mainly of historical interest. A two-phase, three-wire system, consists of two phase voltages, displaced from each other by 90 electrical degrees, and a phase voltage which is 1.414 x phase voltage.A three-phase system consists of three phase voltages which are displaced from each other by 120 electrical degrees. In the case of a three-phase, three-wire, system, the line voltages are numerically equal to the phase voltages; in the case of a three-phase, four-wire, system, the line voltages are 1.732 x phase voltage.
Why Scott connection is used to convert three phase to two phase why cant you take two lines from three phase circuit?
In a two-phase connection, the phases are displaced by 90 degrees. Two lines (not 'phases') of a three-phase system will provide a single-phase supply, not a two-phase supply.
Why is three phase voltage 400 V when single phase is 230 single phase 1.73 3 phase. what is 1.73?
I will try and make this as simplified as possible. The secondary side of transfomers are connected in star - which means there is a neutral / earth connection. If you measure between a LINE to LINE ('line voltage') voltage you will measure 400V, but now we have introduced the neutral / earth and we measure between LINE to NEUTRAL ('phase voltage) 's LINE to EARTH we will get 230 V. The reason for this is that, because the phase voltages are displaced, in time, by 120 electrical degrees, you must add them vectorially to obtain the line voltage. And the vectorial sum of two 230-V phase voltages, displaced by 120 degrees, is 400 V -or 1.732 times either of the phase voltages.
What is 1.73 in load current calculation?
1.73 (the square-root of 3) is the ratio of line voltage to phase voltage in a star (wye) three-phase connection, and is the ratio of line to phase current ratio in a delta three-phase connection supplying a balanced load. In each case, it is derived from the phasor addition of two values displaced from each other by 120 electrical degrees.
What is 250F in C?
250 degrees Celsius is 482 degrees Fahrenheit.
What temperature do the Fahrenheit and Celsius scales converge?
At minus 40 degrees.
What temperature do Fahrenheit and Celsius converge?
Fahrenheit and Celsius scales converge at -40 degrees, where -40°F is equal to -40°C.
What does a straight angle makes?
A straight angle (180 degrees) makes a perfectly straight line. Any degree below 180 degrees (0-179 degrees) is NOT a straight angle NOR a straight line. straight angle = 180 degrees straight angle = straight line 180 degrees
Is 180 degrees obtuse acute straight or right?
180 degrees is a straight line. This means 180 degrees is straight.
How many degrees are there in a straight line?
There are 180 degrees on a straight line.
What is a straight angles degrees?
If you mean a straight line, then 180 degrees.
How many degrees are in straight angle?
A straight angle has 180 degrees in it. 180
Is a straight angle 165 degrees?
No, a straight angle is equivalent to 180 degrees.
How any degrees are n a straight line?
There are no degrees because it is a STRAIGHT LINE
What is 15 degrees north and 90 degrees west?
"90 degrees north" is the definition of the north pole. The longitudedoesn't even matter, because all of them converge there.
What is 90 degrees north and 15 degrees west?
"90 degrees north" is the definition of the north pole. The longitudedoesn't even matter, because all of them converge there.
How many degrees does a straight angle have?
180 degrees.An Straight angel has 180 degrees
