answersLogoWhite

0

You don't. The units measure different things.

User Avatar

Wiki User

10y ago

What else can I help you with?

Continue Learning about Engineering

Convert 5 tonner aircon to horsepower?

10.25hp


How can a 110 volt table saw be rated 4 horsepower at 15 amps?

it cant someone in marketing is lying Regarding any electrical equipment, especially motors, 746 watts or volt-amps is 1 horsepower. If your table saw is rated 4 horsepower, that would be 2984 volt-amps and at 110 volts that calculates to 27 amps. The above answer is correct. At 110 volts you cannot run a 4 horsepower motor on a 15 amp circuit. <<>> The above theoretical answer is correct however you should allow extra for efficiency less than 100% and a power factor less than 1, so the current requirement should be increased by 25% to 34 amps. <<>>The rule of thumb for motors at 240 v is 7 amps per HP, which would be 28 amps for 4 HP, but because the voltage is less the current must be more, 28x240/110 which is 61 amps.


What horsepower os 5.1 amps?

Amps are not directly convertible to horse power, which is a measure of power. Power is current times voltage. Therefore on a 240 v supply, 5.1 amps equals 1224 watts. One horse power is 746 watts.


How do you convert micro amps to amps?

To convert microamps to amps, you need to divide the value in microamps by 1,000,000. This is because one microamp is equal to one millionth of an amp. So, if you have a current of 500 μA (microamps), you would divide 500 by 1,000,000 to get 0.0005 amps.


What is Full Load Amps?

FLA is the nameplate amperage rating of the motor when it is running at its designed horsepower and on the motors designed voltage. 746 watts = 1 HP. The FLA of a 1 HP motor at 240 volts would be W = amps x volts, Amps = Watts/Voltage. 746/240 = 3.1 amps full load. Overload the motor and the amps go higher, motor running at no load amps are lower than FLA

Related Questions

How do you Convert 220v 20hp to amps?

1 horsepower = 746 watts, 1 watt = 1 volt x 1 amp => 20 Horsepower = 14,920 watts => 14,920 watts / 220 volts = 67.82 amps


How many amp in 10 HP?

How to convert horsepower to amps? You'd have to make an assumption about volts. If it's running at 220 volts, that would make it 34 Amps. There are 746 watts in a horsepower and Amps = Watts/Volts.


What is the equivalent of AMPS to horse power?

You are thinking watts to horsepower, not amps to horsepower. Please restate the question.


How do you convert 9 amps to horsepower on a chainsaw?

ANSWER: I will assume the chainsaw is running off 115 volts and is single phase. The formula for this is: HP = VOLTS x Amps x Efficiency x Power Factor / 746 Lets say a single phase 115 volt AC Motor (the chainsaw) has an efficiency rating of 92%, and a power-factor of 80% (because it's inductive). Determine the horsepower if the amp load is 9 amps. HP = 115 x 9 x 0.92 x 0.80 / 746 = 1.021 Horsepower While you don't know the exact efficiency and power factor of your chainsaw I think this is close enough. Any size chainsaw is very dangerous.


How do you convert 500VA into amps?

4.3 amps


How much is 3000 watts in horsepower?

4


Convert 140va at 240v equals amps?

To convert VA to amps, you can use the formula Amps = VA / Volts. In this case, Amps = 140 VA / 240 V = 0.5833 Amps.


Convert 18 VDC to AC amps?

Amps is amps be it DC or AC.


120 watts and 2.2 amps equal how many horsepower?

To convert electrical power (in watts) to mechanical power (in horsepower), you typically need to take into account the efficiency of the system. However, to provide a rough estimate, you can use the formula: 1 horsepower is approximately equal to 746 watts. Therefore, 120 watts would be roughly 0.16 horsepower. Amps alone cannot be converted to horsepower without knowing the voltage across which the current is flowing.


How do you convert LRA to Horsepower?

LRA is not any known unit of measure. You can convert horsepower to BTU per hour, calories per second, ergs per second, watts, Kilowatts, MW, GW, etc.


Convert 6.7 horsepower into cc?

HP does not directly relate to cc


If a vacuum is 1.5 horsepower how many amps is that?

Please note that horsepower and amperes measure different things, so you can't just convert them directly. Convert the horsepower to watts. Then you can divide by the voltage used in your region - usually that's around 110 volts, or 220 volts, depending on the region - to get the amperes. This formula is correct for DC, and approximately correct for AC (in most common cases).