Amps is amps be it DC or AC.
It is drawing .06 amps.
Use a step down transformer 240 primary to 120 secondary. You must know what the connected load (amps) is so that you don't overload the transformer. Small transformers are rated in VA.
Measures current, both AC or DC, usually in Amps.
Watts = Volts x Amps x Power factor For an AC Unit I am guessing that your PF = .75 so we have 115 x 9.2 x .75 = 793.5 Watts.
frequency is genrally cycle per second, and frequencies may be of a dc nature or ac , devices which convert dc frequency in to an ac frequency are frequency converters and devieces which convert ac frequency in to dc frequency are frequency inverters. because in terms of power electronics, devices which convert ac to dc are called converters, and devices which convert dc in to ac are called "inverters" 'mehboob hunzai" I'm a engineers in this devices, the frequency inverter is convert AC to AC but with variable frequency output, means the frequency & voltage are adjustable; The frequency converter can convert DC to AC, like 24VDC to 220VAC and also the frequency is adjustable. One most important thing is the out power of frequency inverter just can be used for controlling AC motor, while frequency converter can be treated as normal power supply as our daily using power grid. "zhuge fs"
The output of a current transformer is AC. Current transducers have added built-in circuitry to convert the AC current into a standard process output. It is DC, although it may be current or voltage. Some standard transducer output ranges are: * 0-10 VDC * 0-5 VDC * 0-1 VDC * 2-10 VDC * 1-5 VDC * 4-20 MADC Some transducers have selectable outputs via programming, switch or jumper settings, others have only one of the above outputs, and must be ordered with the one you need. Check the manufacturer's literature.
P = V x A, POWER (watts) = VOLTS times AMPS But 1.5V AC is not a normal output
A 10-20 vdc power source is a low output power supply used for small devices like battery chargers, notebook computers, and appliances. They use AC power input to convert it into DC power.
To convert VA to amps for DC, you can use the formula: Amps = VA / Volts. For the given values, the max DC current would be 35VA / 20V = 1.75A. The 18V AC value cannot be directly converted to amps without additional information.
VDC stands for "volts direct current," which refers to the voltage output produced by solar panels when they generate electricity. Solar panels convert sunlight into direct current (DC) electricity, which is then typically transformed into alternating current (AC) for use in homes and businesses. VDC is important for understanding the performance and efficiency of solar panels, as it indicates the amount of electrical potential they can produce under specific conditions. Proper management of VDC is essential for optimizing the energy output and integration of solar systems.
How to test a diode bridge ? Diode bridge is a device is used to convert an AC signals (say AC voltage) to DC output (say DC voltage). So, to test it, you can apply a AC voltage v = Vm Sin (wt) at its 2 inputs and measure DC output voltage Vdc.
Power supplies are need by many electronic devices for several reasons. Most devices need one or more DC voltages. Only AC power is available at a common household outlet.Power supplies, among other things, usually must convert AC power to DC power.AC = Alternating CurrentDC = Direct CurrentVDC = Volts of Direct CurrentComputers, for example, need a power supply to convert 120 VAC line power to 6 VDC, 9 VDC and possibly 12 VDC. You will understand this more fully once you get further into the study of things like trigonometry, the calculus, basic circuit design, etc.
Watts are amps x volts, so w/o the volts the question can't be answered. At 100 volts it'd be 15 amps.
A: Three sections one AC to DC converter and a DC to AC converter result inverter A: An inverter changes DC voltage to AC voltage. They are often used for UPS systems or for powering AC devices from automotive or boat batteries.
AC power is electricially, a value that is expressed in watts and voltage is the electromotive force that combined with amps, makes up the formula to find watts. Watts is the product of Amps x Volts. W = amps x volts.
1.9 amps
A resistor, by itself, can not convert DC into AC.