Find a step down 240VAC to 24VAC transformer and connect the 24 VAC output to a full wave bridge rectifier rated for at least 30V. From the DC output of the full-wave bridge you will have 24 VDC. Full wave bridges rectifiers are easy to find at local electronic shops. If you are really adventurous build one out of 4 diodes. There are many plans on the internet
no, the transformer is much more efficient <><><> HOWEVER- a transformer only changes the voltage of AC current- it does not change it to DC. You will still need diodes or rectifiers. You can also use a motor/generator- a 230v AC motor turns a 12 v DC generator.
we can apply 230v ac to kbpc2510 maximum peak voltage is 325v (for 230v) and its blocking capacity is about 1000v so we can use it (I used for the same application)
ac transmits the voltage over long distances. so v use ac in trains
In a car the power supply is DC so all motors in cars work on DC. Also, AC motors are usually designed for 120 v or 240 v so they would not work on 12 v DC. So the answer is no.
HT drives are the pumps or motors operate at more power typically more than 0.5 Amps at 110 or 220 V DC whereas LT drives operate at lesser power less than 0.5 Amps at 24 V DC or 240 V AC.
To convert 1000W at 24V DC to an equivalent wattage at 230V AC, you can use the formula P = VI, where P is power, V is voltage, and I is current. First, calculate the current at 24V DC using P = VI. Then, use this current with 230V to find the equivalent power at 230V AC.
what happan AC 24 V CONNECT EARTH ?
no, the transformer is much more efficient <><><> HOWEVER- a transformer only changes the voltage of AC current- it does not change it to DC. You will still need diodes or rectifiers. You can also use a motor/generator- a 230v AC motor turns a 12 v DC generator.
A lamp will only operate at its rated power at its rated voltage. So if you connected a 230-V lamp to a 110-V supply, its brightness would be very low. It does not matter whether the supply is AC or DC; a lamp would have the same brilliance at 230 V (AC) as at 230 V (DC).As a rule of thumb for fixed-value resistances, a 10% drop in voltage results in a 19% drop in power.
we can apply 230v ac to kbpc2510 maximum peak voltage is 325v (for 230v) and its blocking capacity is about 1000v so we can use it (I used for the same application)
AC DC And Then There Was Rock - 2005 V is rated/received certificates of: UK:E
It is an AC supply with an rms voltage of 230 v and a frequency of 50 Hz, as used throughout Europe.
AC DC Family Jewels - 2005 V is rated/received certificates of: Australia:G
ac transmits the voltage over long distances. so v use ac in trains
In a car the power supply is DC so all motors in cars work on DC. Also, AC motors are usually designed for 120 v or 240 v so they would not work on 12 v DC. So the answer is no.
no, dc volatage is a type of current direct current, ac is alternating current, average voltage could be any type of voltage ac or dc that maintains a constant rangeAnswerNo. A DC voltage is exactly equivalent to an AC rms-voltage. So, for example, 100 V (DC) is exactly equivalent to 100 V (AC rms). The average value of an AC waveform is zero.
no, must be 3v