Without load there is no current so it is impossible to measure it.
The unit of measure for current load is amperage, or simply amps.
by connecting a multimeter u can measure
Without a load the secondary current is zero, by definition.
Measure the current and voltage on the secondary side.
Compute the open load voltage of the current source across its shunt resistance.This voltage becomes the voltage source's voltage.Move the current source's shunt resistance to the voltage source's series resistance.Insert the new voltage source into the original circuit in place of the current source.
by connecting ampere meter in series with load.
The unit of measure for current load is amperage, or simply amps.
by connecting a multimeter u can measure
Without a load the secondary current is zero, by definition.
To measure battery current, you can use a multimeter set to measure current in series with the battery. Connect the multimeter in series between the battery and the load to measure the current flowing from the battery to the load. Make sure to select the appropriate current range on the multimeter to avoid damaging the instrument.
For any power supply application you hav eto measure the supply specifications with the load specifications. If the supply is AC the load should be designed to use AC and the same for DC to DC. The voltages should match up. The current that the load requires must be less than or equal to the current that can be provided by the supply. Lastly the wires connecting the supply to the load must be sized to carry the current required by the load.
Any voltage source, whether a generator or a battery, will NOT supply an output current unless it is connected to a load. So the only way to test the output current is by connecting it to a load.
It measuring by pressing the red button
Current is regulated by the resistance of the load. That said without voltage no current will flow. Both are intertwined, without all the components you have nothing. Refresh your self with Ohm's law. E = I x R, I = E/R, and R = E/I. E = Voltage, I = Amperage, R = Ohms resistance.Visualize it like a triangle, without all three sides you have nothing. Current is produced by lines of flux cutting through a conductor. Voltage is a measure of the force or power of the current produced. ANSWER: VOLTS are just potential it can exist without current. The evidence of this potential is evident as soon as we try to measure it since current now have a path no matter how small or large. The load does not regulate the current flow but rather the potential does. If the potential disappear so does the current no matter what load there is.
If no current flows through a load, then no energy is received by the load. Energy is transferred through the flow of current, so without any current, there is no energy transfer to the load.
Measure the current and voltage on the secondary side.
An ammeter is connected in series with the load to measure the current flowing through the load. By placing the ammeter in series, it becomes a part of the circuit path so that all the current flowing through the load also passes through the ammeter, allowing for an accurate measurement of the current.