Ohms law: I(Amps) = E(voltage) divided by R(resistance). In the case of coils (transformer), the resistance of the coil would simply be the total impedance (Z). If I am remembering this correctly, you get, I=E/(R+Z)
To measure current you will need an ammeter.
It is simple. Resistance is the measure of how strongly a material resists a current.
Without load there is no current so it is impossible to measure it.
amps 'an electrical measure of current.'An ammeter is an instrument used to measure current (amperes), you dont measure ammeters!YEAH
In shortg circuit current is infinitive.
It measuring by pressing the red button
A normal fridge uses 120 v or 230 v and about 100 watts.
In large motors, the no-load current is higher because the motor needs to overcome the friction and windage losses present when running without a load. These losses require more power to overcome, resulting in a higher current draw. When the motor is under a load, the additional power required to turn the load increases the current draw further.
Shock first, then check your stabilizer. Add stabilizer as needed.
The Stabilizer was created in 1984.
To measure current you will need an ammeter.
A multimeter set to measure current (in amperes) would be used to measure current flowing in a circuit. The multimeter needs to be connected in series with the circuit to accurately measure the current.
Amps are a measure of current.
The duration of The Stabilizer is 1.5 hours.
Ampere is the unit used to measure the current.
A stabilizer is typically used for controlling the balance of what the stabilizer is connected too. For instance, a car stabilizer makes sure the car stays in a safe balance.
to measure electric current.