0
What else can I help you with?
How many AMPs does a 7.5HP motor need?
depending on 1phase or 3phase voltage motor , the amphere requirement is found outfor 3phase AC motor use this formula: (HP x 746)/(1.73 x E x Eff x PF)for 1phase AC motor : (HP x 746) / (E x Eff x PF)
Can a 600 volt 3phase electric motor run on 1phase?
Yes it can run when single phasing in a delta configuration but the motor will not start from a dead stop. There will be quite a bit of degradation in its operation from its nameplate data.
How do you calculate LRA to tonnage?
LRA245 convert to ton 220 3phase
How do you get a 220 volt single phase from 380 volt 3phase synchrounos generator?
220 volt single phase from 480 volt 3 phase that one wire taken one phase and second wire connected in earth point. we get 220 v The above answer is incorrect, one phase from a three phase 480 volt system will give you 277 volts to ground. You must use a transformer to get the voltage you need.
How do you convert 3phase 1hp motor into units?
Into units of what?
How many AMPs does a 7.5HP motor need?
depending on 1phase or 3phase voltage motor , the amphere requirement is found outfor 3phase AC motor use this formula: (HP x 746)/(1.73 x E x Eff x PF)for 1phase AC motor : (HP x 746) / (E x Eff x PF)
Can you replace a 110V hospital bed motor with 220V motor?
Yes, if you rewire the bed and rewire the plug on the wall to 220 volts.
Can a 220 volt 3 phase motor be connected to a 208 3phase curcit?
Yes.
How do you rewire a 110 volt HID Magnetic coil ballast to use 220 volt?
Rewiring a 110 volt HID magnetic coil ballast to operate on 220 volts would require replacing the existing ballast with one designed for 220 volts. Attempting to rewire the ballast could lead to overheating, electrical failures, or even safety hazards. It is recommended to consult a professional electrician or purchase a new ballast suitable for 220 volts.
Can you rewire a mixer 120 volt motor to run a 220 volts?
It is not recommended to rewire a 120-volt motor to run on 220 volts, as it can damage the motor and pose a safety risk. It is best to purchase a motor designed to run on 220 volts to ensure proper functioning and safety.
Is there an adapter that will make a 110 volt refrigerator receptacle into a 220 volt?
No. You need to rewire the circuit from the electric panel.
Can a 600 volt 3phase electric motor run on 1phase?
Yes it can run when single phasing in a delta configuration but the motor will not start from a dead stop. There will be quite a bit of degradation in its operation from its nameplate data.
How do you calculate LRA to tonnage?
LRA245 convert to ton 220 3phase
Is there a way to rewire a 5hp 3phase motor to run off of 240v without buying additional equipment?
No, you only have phase a and b. The motor will run as smoothly as a 3 phase motor that has lost a leg of power. That is if the motor is designed for 208v in the first place. Not a good idea.
What is voltage of 1phase?
In the United States, this is typically between 220 V and 240 V RMS, off a center tapped transformer, to give two lines of 110V to 120V each (180° out of phase from each other). But this is still considered single phase.
How many kva on 88.88 amps in 1phase secondary 230 volts?
20.44 kva
Which starter is best for 7.5 hp 3phase motor?
Which starter is best for 7.5 hp 3phase motor?Read more: Which_starter_is_best_for_7.5_hp_3phase_motor
