answersLogoWhite

0

I normally lead wipe the lead to lead connection using flemico #1 Warrenteed bar solder. If you cannot get flemico try getting 40/ 60 solder in bar form then lead wipe it

User Avatar

Wiki User

17y ago

What else can I help you with?

Continue Learning about Engineering

How do you install a toilet bowl?

To install a toilet bowl, first, turn off the water supply and drain the existing toilet. Remove the old toilet by unscrewing the bolts and lifting it off the flange. Place a new wax seal on the flange, set the toilet bowl onto the flange, and secure it with bolts. Finally, reconnect the water supply, check for leaks, and ensure the toilet is level.


Should you glue your toilet closet flange to your pipe?

No, it is not recommended to glue the toilet closet flange to the pipe. The flange should be secured to the floor using bolts or screws, and the toilet is then secured to the flange using wax rings or sealing gaskets. Gluing the flange to the pipe can make it difficult to remove or replace the toilet in the future.


What is a compression flange?

A compression flange is used to connect a toilet to the sewer line.


How do you remove toilet flange from pipe?

To remove a toilet flange from a pipe, first turn off the water supply and disconnect the toilet from the flange. Use a utility knife to cut any caulk or adhesive around the flange. If the flange is secured with screws, use a screwdriver to remove them. Finally, gently lift the flange off the pipe, taking care not to damage the pipe itself.


How do you lower a toilet flange that is above the concrete foo?

To lower a toilet flange that is above the concrete floor, first, remove the toilet and the existing flange. If the flange is too high, you can cut it down using a hacksaw or a reciprocating saw, ensuring you leave enough height for the wax ring to seal properly. Alternatively, you can add a spacer to the flange to bring it to the correct height if cutting is not feasible. Once adjusted, reattach the flange securely before reinstalling the toilet.

Related Questions

How do I install a new toilet flange?

To install a new toilet flange, first remove the old flange and clean the area. Place the new flange over the drain pipe and secure it with screws. Make sure it is level and properly aligned. Finally, connect the toilet to the flange and secure it in place.


How do you install a toilet flange correctly?

To install a toilet flange correctly, first remove the old flange and clean the area. Place the new flange over the drain pipe and secure it with screws. Make sure it is level and properly aligned. Finally, connect the toilet to the flange using wax rings and bolts, then secure the toilet in place.


Should the toilet flange be flush with the floor when installing a toilet?

Yes, the toilet flange should be flush with the floor when installing a toilet to ensure a proper and secure fit.


How do I properly install a new toilet flange?

To properly install a new toilet flange, first remove the old flange and clean the area. Place the new flange over the drain pipe and secure it with screws. Make sure it is level and flush with the floor. Finally, connect the toilet to the flange using a wax ring and bolts, then secure the toilet in place.


How can I replace a toilet flange effectively?

To replace a toilet flange effectively, you will need to remove the toilet, unscrew the old flange, clean the area, install a new flange, and secure it in place. Make sure the new flange is level and properly sealed before reattaching the toilet.


How can I raise a toilet flange?

To raise a toilet flange, you can use a flange extender kit or add extra wax rings to increase the height. Make sure to secure the flange properly to prevent leaks.


Is it possible to install a toilet properly if the toilet flange is too high?

Yes, it is possible to install a toilet properly even if the toilet flange is too high by using a flange extender or a wax ring with an extra-thick flange. These solutions can help ensure a secure and leak-free installation of the toilet.


How can I repair a broken toilet flange?

To repair a broken toilet flange, you can follow these steps: Turn off the water supply to the toilet. Remove the toilet and clean the area around the flange. Use a repair kit or a new flange to replace the broken one. Secure the new flange in place and reattach the toilet. Turn the water supply back on and test the toilet for leaks.


How do you properly set a toilet flange?

To properly set a toilet flange, first ensure the flange is level with the floor. Secure it in place using screws or bolts. Make sure the flange is tightly sealed to the drain pipe. Test for stability before installing the toilet.


How do you set a toilet flange properly?

To set a toilet flange properly, first ensure it is level and securely attached to the floor. Use a wax ring to create a seal between the flange and the toilet. Place the toilet over the flange and press down firmly to create a tight seal. Secure the toilet in place with bolts and caps.


What is a toilet flange and how does it contribute to the proper installation and function of a toilet?

A toilet flange is a round piece of plumbing that connects the toilet to the floor drain. It helps secure the toilet in place and creates a seal to prevent leaks. The flange also provides a stable base for the toilet to sit on, ensuring proper alignment and function.


How do I properly install a toilet flange on tile?

To properly install a toilet flange on tile, first ensure the tile surface is clean and level. Place the flange over the drain hole and mark the screw holes on the tile. Drill pilot holes for the screws, then secure the flange to the tile using screws. Make sure the flange is level and flush with the tile surface. Finally, connect the toilet to the flange using a wax ring for a secure seal.