answersLogoWhite

0

What else can I help you with?

Continue Learning about Engineering

What is a DIY method to calibrate a tripod mounted transit level or check it for accuracy?

To check for accuracy, set up water level, then shoot the ends.


How do you turn a 1964 Lincoln welding machine into a big generator?

It's an engine driven generator like a Ranger, correct? They already come set up to be used as either welding machine or generator when they come from the factory.


How the doubly fed induction generator build up voltage?

If a self-excited generator lost all its residual magnetism, can it build up an output voltage?


Can you plug in a small powerful electric generator device to a battery to make electric energy for forward backward usage?

The device described here goes under a few different names, and one is a motor-generator set. The motor-generator set (MG set) already exists, and one example might be the ones in submarines. Let's look at the setup. The electrical bus in the modern submarine is AC, and the storage batteries are DC. This MG set has a DC end connected to the batteries, and an AC end connected to the electrical bus. By sticking that MG set between the batteries and the AC bus, the AC power, delivered normally by steam turbine generators, charges the batteries and keeps the lights and everything else powered up. If the turbine generator goes down, the MG set, which has been acting as an AC motor and a DC generator, will switch functions. In its new configuration, the MG set's DC end becomes a motor (taking battery power), and the AC end becomes a generator, which then powers up the ship's AC electrical bus. There may be some small MG sets out there, and a bit of searching may reveal a source or sources. Certainly as this equipment already exists, it is just a matter of finding it in the right size. Note, however, that banks of storage batteries can be set up, an AC charging system can keep them up, and a big inverter can convert the stored DC to a usable AC voltage for delivering power to any AC device (with load limits, of course). The advantage here would be that you can buy all the batteries you need, a small emergency generator, a battery charger, and a handful of inverters right now. All of those things are common, readily available, and fairly inexpensive compared to what you'd have to shell out for a little MG set.


What is the line coding scheme used for the DS-1 signal?

the line coding can be either AMI or B8ZS according to how the equipment is set up along the path and at either end.

Related Questions

How do you set up guitar and microphone on ps3?

If they guitar and mic are wireless you have to calibrate them in the settings.


How can I set up a generator hookup for my house?

To set up a generator hookup for your house, you will need to install a transfer switch to safely connect the generator to your electrical system. This switch will allow you to easily switch between utility power and generator power when needed. It is important to follow all safety guidelines and local building codes when installing a generator hookup to ensure proper functionality and safety for your home.


How do you set up wifi for transformers autobots?

You need a WiFi signal, then go to Allspark Wars on the game and then to WiFi set up. Click the blue button, followed by search for access point. It will pick up the internet signal.


Are the requirements to be allowed to set up satellite dish equipment in Toronto, Ontario?

There are no requirements to set up a satellite dish if you are just looking to receive a signal. There are signal transmitting requirements if you wish to project a signal that goes through licensing, content, and national standards.


Why does boost mobile voice mail have busy signal?

yes i have a boostmobile phone when i try to set up my voicemail i get a busy signal can you help me set up my voice mail


What is a DIY method to calibrate a tripod mounted transit level or check it for accuracy?

To check for accuracy, set up water level, then shoot the ends.


How can your drum set pick up signal?

With a transducer mounted to the drum skin


How can you set up a local TV network in the UK?

have a tv station and transmit a signal


How do you turn a 1964 Lincoln welding machine into a big generator?

It's an engine driven generator like a Ranger, correct? They already come set up to be used as either welding machine or generator when they come from the factory.


Does a back up generator need initial electricity to work?

No, a backup generator does not need initial power to work. Once it senses that the main source of power is cut off, the control will send a signal to the generator and the generator will kick start and provide electricity until it senses that a stable power source has returned. Then, it would switch off and be on standby mode again.


Why is the field rheostat of a DC motor kept at minimum position while starting?

If you are talking about the field rheostat on a generator, once you have the correct voltage output set, it is very unlikely that it has to be touched again. If it is the generator's first start up, then it is best to set the field on the low side so as not to over excite the generator and drive the output voltage higher that what the generator's specifications are rated at. The field excitation voltage does not have to be set at the minimum position on every start up once it is set for the correct output voltage. A good example of this is a hospital standby generator, it starts up with no human intervention needed.


What does beacons mean?

A fire or light set up in a high or prominent position as a warning, signal, or celebration.