0
What else can I help you with?
How much reinforcement steel required in 1 m3 concrete of M50 Grade?
i dn k=12*45
How much does 1 yard of free-flow concrete cost?
How much is 4.5 yards of concrete in Red Oak TX
1 meter ton of asphalt how many cubic meters?
Density of asphalt is depending on several specifications but overall it'll be between 1,010 and 1,300 kg/m3. So this is between 0.99 and 0.77 m3/1000kg Asphaltic concrete is about 2,240 kg/m3 (0.446 m3/1000kg)
Cost of 1 cubic meter of M30 concrete in India?
2900
How much concrete is in one bag of concrete?
Most bags will make a 1/3 of a cubic foot of concrete.
How much reinforcement steel required in 1 m3 concrete of M50 Grade?
i dn k=12*45
How much does 1 yard of free-flow concrete cost?
How much is 4.5 yards of concrete in Red Oak TX
What is the concrete mixing ratio in m60 concrete?
cemet: sand: Agg=1:1:2 (Nominal Mix) Above answer is not as per engineering standards. For concrete mixing ration in M30 grade concrete, the mix has to be designed after testing all the materials including water in labs. When you go for higher grade of concretes the mix has to be designed , it is the water to cement ratio which has to be monitered for higher grades of concrete
How may cement sand and gravel in 1 cubic meter of concrete if the ratio is 1 is 2 is to 4?
To calculate the quantities of cement, sand, and gravel in 1 cubic meter of concrete with a ratio of 1:2:4, you first need to determine the total parts of the mixture, which is 1+2+4=7 parts. Then, divide 1 cubic meter by the total parts (1/7, 2/7, 4/7) to get the volume of each ingredient. So, in 1 cubic meter of concrete, you would have 0.143 cubic meters of cement, 0.286 cubic meters of sand, and 0.571 cubic meters of gravel.
How much does a mud jacking cost?
Mudjacking saves money, The cost is 1/3 to 1/2 the cost of replacement of the concrete. The slabs can be used almost immediatley!
How much m3 is equal to 1 brass?
2.83
How much cubic meter of concrete will use for 1000sft slab?
For a 1000 sqft slab with a thickness of 4 inches, you would need approximately 33 cubic meters of concrete. This calculation is based on the assumption that 1 cubic yard of concrete covers 81 square feet at 4 inches thick.
1 meter ton of asphalt how many cubic meters?
Density of asphalt is depending on several specifications but overall it'll be between 1,010 and 1,300 kg/m3. So this is between 0.99 and 0.77 m3/1000kg Asphaltic concrete is about 2,240 kg/m3 (0.446 m3/1000kg)
How much M3 in one HM3?
1 000 000
How many kg need binding wire for 1 m3 concrete?
Typically, 0.2 kg of binding wire is needed per cubic meter of concrete for binding purpose.
How many kgs in a M3?
The weight of 1 cubic meter (m3) depends on the material being measured. For solid materials like concrete, the weight can vary between 1000-2500 kg/m3. For liquids, it can vary between 800-1200 kg/m3. For gases, it can vary depending on the density of the specific gas.
How many tons does 40000.00 m3 weigh?
The weight of 40,000.00 m3 will depend on the material being measured. As a rough estimate, 1 m3 of most common construction materials like concrete or soil weighs around 2 to 2.5 tons. So, 40,000.00 m3 could weigh between 80,000 to 100,000 tons.
