A 160A three-pole (TP) isolator can typically handle a maximum load of 160 amperes per phase. However, the actual load it can carry depends on factors such as the type of load, ambient temperature, and installation conditions. It's important to ensure that the isolator is used within its rated capacity to prevent overheating or damage. Always refer to the manufacturer's specifications and local electrical codes for precise guidelines.
25 kV.A for a permanent load; more if the load is variable.
maximum demand load can be calculated as: # maximum demand=demand factor * Connected load or by # maximum demand = connected load * Diversity Factor Note: Demand factor and diversity factor are NOT same
A river's load refers to the materials, such as sediment, rocks, and organic matter, that the river transports along its course. This load can be carried in several ways: dissolved load (minerals dissolved in water), suspended load (particles carried within the water column), and bed load (larger particles that roll or slide along the riverbed). The river's velocity and flow determine how much and what type of load can be carried, with faster flows able to transport larger particles.
The FLA of a motor is the amperage that the motor operates at. So to answer the question, 100%.
You need to conduct No load and full load losses tests to determine the losses.
1 gram carrys 9.45 calories/38 kJ
2x6x12 load
too much load
It is resistive much load
because sound and smeel carrys much easier exaust will linger in the air and enter the vehicle
250.00 a load
The point at which stress goes on increasing without much load is called the critical load.
25 kV.A for a permanent load; more if the load is variable.
Load Shedding is the action taken to reduce the load on something. It mainly refers to the electricity supply in order to avoid too much load on a generating plant.
Get better internetszz!
A load is not a standard measure and so the answer depends on the material in question.
a shiznet load