0
Calculating that is a CUBIC measurement, which means you need a value for width, Length and depth. in metric measure it is easier than English standards ..
Once you have those three just multiply the three & you will know how much you need.
IF your fill area is 2 Meters wide, 3 meters long and 1/2 meters deep the equation calculates like this (2X3X .5)=3 cubic meters
Hope that helps
What else can I help you with?
How much cement is needed for a slab of cement 9 centimers thick and 23 meters long and 2 meters wide?
4.14 cubic metres.Sounds like you are doing a driveway. If it was me I'd buy 5 cu. mtrs. I have always believed it has to be 4 inch [10cm] if cars are to use it.
How much pressure does it take to make cement crack?
That depends on the thickness of the cement, the strength of the cement, the age of it, Is it reinforced
How much does 1kg of cement cost?
200
How much water is required in 1 bags of cement?
it depends on the type of mix and water cement ratio.
How much cement do you order?
I am building a curb that will be 26 feet long, 6.5 inches wide and 4 inches deep. How much cement do I need?
How much to travel 1 kilometer if it costs 0.25 to travel 170 meters?
170m = 25¢ 1000m = 1k (1000 / 170) x .25 = ? Answer: $1.47
How much cement to fill a 16x8x16 block?
1.042 CF of concrete per unit
How much cement is needed to concrete an area 27 meters long by 1.6 meters wide with it being 75 millimeters thick?
4.23776 cubic yards
How much water would be needed to fill a pond of 36 cubic meters?
9,510.19 Gallons
How much cement is needed for a slab of cement 9 centimers thick and 23 meters long and 2 meters wide?
4.14 cubic metres.Sounds like you are doing a driveway. If it was me I'd buy 5 cu. mtrs. I have always believed it has to be 4 inch [10cm] if cars are to use it.
How much aggragate to fill 35sq meter 300mm deep?
To calculate the amount of aggregate needed to fill an area of 35 square meters to a depth of 300 mm (0.3 meters), you can use the formula: Volume = Area × Depth. Therefore, the volume required is 35 m² × 0.3 m = 10.5 cubic meters. You will need approximately 10.5 cubic meters of aggregate for this fill.
How much water to fill a pond 5m x 2m x 1.5m deep?
To calculate the volume of water needed to fill a pond measuring 5 meters in length, 2 meters in width, and 1.5 meters in depth, you can use the formula for volume: length × width × depth. This would be 5m × 2m × 1.5m, which equals 15 cubic meters. Therefore, you would need 15 cubic meters of water to fill the pond.
How much does it cost to install cement?
It cost as much as it costs to install cement. Ken It cost as much as it costs to install cement. Ken
How much the volume of 42.5kg cement bag?
The volume of a 42.5 kg bag of cement can be estimated based on the density of the cement, which is typically around 1,440 kg/m³. Using this density, the volume can be calculated as follows: Volume = Mass / Density. Thus, the volume of a 42.5 kg bag of cement is approximately 0.0295 cubic meters, or about 29.5 liters.
How much cement fits in a cement truck?
About 8m^3
How much is a bag of cement in Zimbabwe?
Price of the bag of cement in zimbabwe
How much cement used in 1m3 reinforcement cement concrete?
Which Grade?
