0
What else can I help you with?
What size cable for 90kW 3phase 440v 50Hz motor?
To size cable the amperage must be known. Use the following equation to find amperage. Amps = kW x 1000/1.73 x volts x pf. A standard motor's power factor between 10 to 100 HP is .86 to .92. Amps = 90 x 1000 = 90000/ 1.73 x 440 x .92 = 90000/700 = 128 amps. Motor feeders have to be rated at 125% of the motor full load amperage. 128 x 125% = 160 amps. A 2/0 copper conductor with an insulation factor of 75 or 90 degrees C is rated at 175 and 185 amps respectively.
What is the difference between flange mounted and foot mounted electric motor?
The foot-mounted version is also commonly referred to as B3 motor. The DR motor is available with a NEMA "C-face" flange . The "C-face" flange-mounted motor is a motor type with tapped holes in the flanged end shield.
What size power cable is needed for 30KW 440V 3phase 50Hz induction motor?
Use this formula to find amperage when kW is shown. Amps = kW x 1000/1.73 x Volts x pf. Use a power factor of .85 for the formula. Once the current is calculated re-ask the question for cable size for the calculated current.
How do you use this function in c programme?
I don't use that function in C programme.
Where to you use generics in c?
C doesn't have generics, that's C++.
What does a class C motor home mean?
Class C motor homes are built on a van chassis. Basically, the entire front part of the motor home has the appearance of a van. A class C motor home is sometimes called a mini motor home.
What is a blower motor?
the motor for your heat and A/C interior fan
What has the author A C Sarna written?
A. C. Sarna has written: 'Disaggregated land use-transport model for Delhi, India' -- subject(s): Choice of transportation, Land use, Mathematical models, Planning
What size cable for 90kW 3phase 440v 50Hz motor?
To size cable the amperage must be known. Use the following equation to find amperage. Amps = kW x 1000/1.73 x volts x pf. A standard motor's power factor between 10 to 100 HP is .86 to .92. Amps = 90 x 1000 = 90000/ 1.73 x 440 x .92 = 90000/700 = 128 amps. Motor feeders have to be rated at 125% of the motor full load amperage. 128 x 125% = 160 amps. A 2/0 copper conductor with an insulation factor of 75 or 90 degrees C is rated at 175 and 185 amps respectively.
Would a Chevy 350 bolt up to the original motor mounts in a 1980 Chevy c 10 with a straight 6?
NO IT WILL NOT. Must use V-8 frame mounts and motor mounts.
What has the author G C Awasthy written?
G. C. Awasthy has written: 'Broadcasting in India' -- subject(s): Radio broadcasting, India (Republic). All India Radio, India (Republic)
How long will 185 C of electric charge take to pass through the motor with a current of 350 mA?
To calculate the time it takes for the charge to pass through the motor, you can use the formula Time = Charge / Current. Plugging in the values, Time = 185 C / 0.35 A = 528 seconds. So, it will take 528 seconds for 185 C of electric charge to pass through the motor with a current of 350 mA.
Something in India that starts with a C?
cows
How much c a earn in India?
4000
What has the author C Prakash written?
C. Prakash has written: 'The Indian Army' -- subject(s): History, India, India. Army, Military History
Who is the supreme commander of the armed forces in india?
The President of India is the Commander In Chief of Armed forces of India. There is no designation as Supreme Commander in India. C-in- C is the equivalent and comparable designation.
What is the difference between flange mounted and foot mounted electric motor?
The foot-mounted version is also commonly referred to as B3 motor. The DR motor is available with a NEMA "C-face" flange . The "C-face" flange-mounted motor is a motor type with tapped holes in the flanged end shield.
