0
Yes, it's perfectly acceptable to have an 8-foot exterior door alongside 6-foot 8-inch interior doors. This design choice can create a striking visual contrast and enhance the overall aesthetic of a home. Just ensure that the door heights align with your architectural style and functional needs. Additionally, check local building codes for any specific requirements regarding door dimensions.
What else can I help you with?
What is the purpose of revolving doors?
Revolving doors are chosen by architects as a space efficient and energy efficient way of allowing large amounts of foot traffic to enter a building. As the door revolves there is a constant seal between the doors and the surrounding walls preventing unwanted heat loss and pressure differences (or wind). To achieve the same effect using automatic sliding doors, you would need two sets of doors in parallel to form a wind lobby which can take up a large amount of the main entrance to a building, as well as not always effective (eg if both sets of doors are open at the same time). Revolving doors are also designed so the door leaves can be unlocked and rotated to an open position. This is so traffic can still enter and exit in the event of a power failure. Some even have a rechargable backup battery. Revolving doors are expensive, costing $50,000 - $250,00 USD complete. Compared to $2000 - $5000 USD for automatic sliding doors. Revolving doors do not latch to an opposite door. They are attached to a fixed point and thus only spin in the area given to them. However, they can be slammed into a person or object. So next time you use one, look before you spin the door.
The term revolving door describes what?
An entryway for a building that consists of four glass panels that rotate about an axis. They are used to save energy in buildings that have a lot of foot traffic, because the door is never really "open" to allow heated or cooled air to escape.
Cost to wrap exterior fascia trim with aluminum wrap?
The cost to wrap exterior fascia trim with aluminum wrap typically ranges from $5 to $15 per linear foot, depending on factors such as the type of aluminum, labor costs, and the complexity of the installation. Additional expenses may include removal of old trim or repairs to the underlying structure. It's advisable to get multiple quotes from contractors to ensure a competitive price for your specific project.
What is a foot valve?
A foot valve is something that you eat with your foot
How can you make a button to lock the door that a small dog can use?
It depends on the lock and where the mechanism is. Need the year, make, and model in order to provide a better answer. Locks that have a plunger type mechanism can have a modification made so the foot would activate the lock.
Where can you buy a 6 foot high exterior door?
I think 80" is standard-at least for the doors.
Standard door heights?
The standard exterior door height is 80 inches. The standard exterior door width is 36 inches. The thickness of the door should be at least 3/4" thick.
Where does a kick plate go?
A kick plate is typically installed at the bottom of a door, especially on exterior doors or high-traffic interior doors. Its primary purpose is to protect the door from scuffs, scratches, and damage caused by foot traffic or equipment. Kick plates can also help maintain the door's appearance and prolong its lifespan. They are usually made of metal, plastic, or wood and can be decorative as well as functional.
What is the average cost per square foot to paint interior or exterior in Oregon?
The average cost per square foot to paint interior in Oregon is $ 3000 to $ 4000. The average cost of per square foot to paint exterior in Oregon is $ 1.42 per square foot (Range is $ 1.32 to $ 1.52 ).
What is a kick panel panel?
Kick panels are the interior trim panels , in front of the front doors , beside the drivers left foot and the front passengers right foot
What is the cost per square foot to paint a 2000 sqare foot house in Ottawa Ontario?
I would say.. if its exterior..That depends on if it speeling..If its in pretty good shape..1.26 s/f Now if its Interior..There are variables..How Many doors..is there stair rails and railins..will you paint the ceilings..cause you have to add that sq, footage in also..How any linier feet of base..There is a lot to look at. Add 120.00 per door..2000 S/F should be about 1800.00 then meterials..doors and 1$ a linier foot for all base.
Height of a door?
Most residential doors are 6 foot 8 inches.
What unit of measure you would you use to measure the height of a classroom door?
Typical height is 80 inches.
What height of a door?
Most residential doors are 6 foot 8 inches.
How big is a garage door?
Garage Door PhoenixGarage Doors come in standard sizes such a 8x7, 9x7,10x7,16x7,18x7 , these are the size for your typical 7 foot high Garage door they also come in the larger 8 foot high and 10 foot high sizes ,
What is the rough opening requirement for an interior door that is 3 foot with a frame size of 3 foot 1-58?
The rough opening of an interior door is two inches wider than the width of the door and two inches higher than its height. Thus your rough opening width is 38". A typical interior door has a height of 80" which would require a rough opening height of 82" but check your door to ensure that is theheight.
What unit would you use to measure the height of a door?
The best answer for that is to say metres.
