0
What else can I help you with?
Can a 2800 rpm motor replace a 1400 rpm motor for air compressor?
No
Why a dc series motor should never run at no load condition?
if you run the unloaded motor at max rpm the centrifugal forces will cause the motor to be totally destroyed so it is advisable to not to run it at max rpm it should be okay to run it till 50% of max rpm without loading it
What is the maximum RPM does a 3 phase motor run at?
The formula for RPM is ; RPM = Hz x (120 (constant)) divided by the # of poles. Number of poles a motor has; # of poles = Hz x (120 (constant)) / RPM.
What is motor rpm of 20 hertz?
Motor RPM (revolutions per minute) can be calculated from frequency in hertz (Hz) using the formula: RPM = Hz × 60. Therefore, for 20 Hz, the calculation would be 20 × 60, resulting in 1200 RPM. This means a motor operating at 20 hertz is rotating at 1200 revolutions per minute.
How do you reduce rpm of an electric motor from 1200 rpm to 240 rpm?
You would use a worm drive meshed with a gear that has 130 teeth.
Which ac motor gives high output rpm?
ac universel single phase motor
Why 2900 rpm motor is less price than 1450 rpm motor?
Materials for producing 2900 rpm motor is less than 1450 rpm one
Why are your RPMs high at high speeds?
Because your motor is spinning faster at higher speeds causing higher rpm's
Can a 2800 rpm motor replace a 1400 rpm motor for air compressor?
No
Why does 95 probe overheat when engine at high RPM?
The engine is not meant to run at high rpm's at a stop for a long amount of time. The motor cant circulate antifreeze and there is no air to cool the motor at a stop. Any car will do that. What a stupid answer! I didn't say I was stopped!
What is the relationship between motor POLE and RPM?
Relationship between motor rpm and no of poles
Why a dc series motor should never run at no load condition?
if you run the unloaded motor at max rpm the centrifugal forces will cause the motor to be totally destroyed so it is advisable to not to run it at max rpm it should be okay to run it till 50% of max rpm without loading it
What RPM can you get out of a 440 cu in motor?
I believe redline is 5,000 RPM.
Should 1993 Geo storm motor die when put in gear but will run if the rpm's are kept high?
Yes, that is how they are made
Why is my 1995 Saab 900se turbo popping out of 3rd gear at high rpm?
It might be a worn/broken motor mount.
What is the maximum RPM does a 3 phase motor run at?
The formula for RPM is ; RPM = Hz x (120 (constant)) divided by the # of poles. Number of poles a motor has; # of poles = Hz x (120 (constant)) / RPM.
Can 2800 rpm motor replace 1400 rpm motor for centrifugal water pump?
No. The water pump is designed for a specific RPM. It will not operate correctly, and will probably be damaged, if you attempt to operate it at twice the design RPM.
