0
Susan remove the motor from circuit the current increased in circuit how did this affect the bulb?
When Susan removed the motor from the circuit, the load on the circuit decreased, leading to an increase in current. This increase in current could cause the bulb to shine brighter, as it receives more electrical energy. However, if the current exceeds the bulb's rated capacity, it could also risk damaging the bulb or shortening its lifespan. Therefore, the effect on the bulb depends on the extent of the current increase.
What else can I help you with?
How can a broken wire affect a series circuit differently than a parallel circuit?
In a series circuit, all the current passes through the one circuit. Any break will totally remove power from all of the circuit.Parallel circuits have more than one branch where the current can flow. A broken wire will only affect one part, the rest of the circuit will still pass current.In a series circuit, all the current passes through the one circuit. Any break will totally remove power from all of the circuit.Parallel circuits have more than one branch where the current can flow. A broken wire will only affect one part, the rest of the circuit will still pass current.
In a series circuit what would happen if one of the bulbs stopped working?
All the bulbs will go out. In a series circuit, the current at all points is the same. This is Kirchoff's Current Law. If you loosen or remove a bulb in a series circuit, the current at that bulb becomes zero, and by Kirchoff's Current Law, the current in every part of the circuit also becomes zero.
What happens if you remove a bulb from a mixed circuit?
If you remove a bulb from a mixed circuit (a circuit with both series and parallel components), the effect depends on the arrangement of the circuit. In a series part of the circuit, removing a bulb breaks the circuit, causing all bulbs to go out. In a parallel section, removing one bulb will not affect the others; they will remain lit. Overall, the behavior of the circuit depends on how the bulbs are connected within the mixed configuration.
What happens when you remove one bulb from a series circuit?
Answer: it will burn out **Explain:**The same current flows through each part of a series circuit. If the circuit is broken at any point there won't be any current that will flow. In this case, if one of the bulbs blew out, the other bulb would not be able to light up because the flow of electric current would have been interrupted. #Carryonlearning
What componnet can you remove and the circuit will still be working?
In many circuits, a resistor can often be removed while still allowing the circuit to function, depending on its role. For example, if the resistor is used for current limiting in a non-critical part of the circuit, removing it may not prevent the circuit from operating, though it could affect performance or safety. However, it's essential to consider the specific design and purpose of the circuit, as removing other components could lead to failure. Always consult the circuit diagram and specifications before making changes.
How can a broken wire affect a series circuit differently than a parallel circuit?
In a series circuit, all the current passes through the one circuit. Any break will totally remove power from all of the circuit.Parallel circuits have more than one branch where the current can flow. A broken wire will only affect one part, the rest of the circuit will still pass current.In a series circuit, all the current passes through the one circuit. Any break will totally remove power from all of the circuit.Parallel circuits have more than one branch where the current can flow. A broken wire will only affect one part, the rest of the circuit will still pass current.
Why does a circuit stop working when you remove the battery?
The battery is the power source of the circuit. It supplies current to the circuit and the circuit is simply a path for the current to follow. When you remove the current (battery), the path still exists but there is no current going through it.
What causes a starter fuse to blow on a 04 expedition?
Over load in circuit? Remove starter and have it checked at auto parts for excessive current draw Dead short to ground in circuit? Over load in circuit? Remove starter and have it checked at auto parts for excessive current draw Dead short to ground in circuit?
Susan remove the motor in circuit which increase the current how it affects bulb?
lol
In a series circuit what would happen if one of the bulbs stopped working?
All the bulbs will go out. In a series circuit, the current at all points is the same. This is Kirchoff's Current Law. If you loosen or remove a bulb in a series circuit, the current at that bulb becomes zero, and by Kirchoff's Current Law, the current in every part of the circuit also becomes zero.
If you remove one bulb from a string of lights all the remaining lights will go out. are the lights in a series circuit or parallel circuit Explain?
Removing any bulb breaks the continuity of a series circuit, stopping the flow of electrical current. Removing a bulb in a parallel circuit does not interrupt the current flow, so the remaining lights continue to conduct electrical current.
What happens when you remove one bulb from a series circuit?
Answer: it will burn out **Explain:**The same current flows through each part of a series circuit. If the circuit is broken at any point there won't be any current that will flow. In this case, if one of the bulbs blew out, the other bulb would not be able to light up because the flow of electric current would have been interrupted. #Carryonlearning
What componnet can you remove and the circuit will still be working?
In many circuits, a resistor can often be removed while still allowing the circuit to function, depending on its role. For example, if the resistor is used for current limiting in a non-critical part of the circuit, removing it may not prevent the circuit from operating, though it could affect performance or safety. However, it's essential to consider the specific design and purpose of the circuit, as removing other components could lead to failure. Always consult the circuit diagram and specifications before making changes.
When the resistor removed from a parallel connection of the circuit whether the resistance increase or decrease?
if we remove a resistor from the parallel connection the effective resistance value will be increased.
How do you calculate thevenis resistance in thevenis ckt?
First,remove all current and voltage sources ie replace voltage source with a short and keep current source open.Now draw the equivalent resistance-only circuit and find the equivalent resistance as viewed from the terminals of the circuit.
What is overloading in electric current?
Overloading of electric circuit means that the current circulating in the circuit becomes more than the capacity of components in the circuit to withstand the current. All components in the circuits have some resistance passage of electricity through this resistance produces heat which is directly proportional to the square of current flowing. The components are designed to withstand only that much of heat as is generated by maximum designed current. When the current is more than this level, or in other words when the circuit is overloaded the components get overheated, leading to their damage. Frequently electric circuits in homes, factories, and other electrical installations incorporate fuses, which are essentially circuit component which protect other components in the circuit by quickly melting or burning out when the circuit is overloaded, resulting in breaking of the circuit. In common language this is called blowing of fuse.
How do you upgrade from 120V 15A to 120V 20A or from 240V 20A to 240V 30A?
You have to replace the wire (as you are increasing the current capacity), the outlet, and the breaker. Essentially you have to remove the old circuit and put in a new one. You can't reuse parts of the old circuit as you are increasing the current capacity and they would be underrated.
