A series circuit only has one loop
False. A device that is used to open the circuit when the current flow is too great is a circuit breaker or fuse.A disconnect switch is a manual device that isolates or turns off the load.
Yes. Most flashlights have a series circuit involving a battery, a switch, and a bulb. More complex variants might have two bulbs in parallel, two or more bulbs on two switches, etc. but the basic principle is a series circuit - turn the switch on and the bulb illuminates.
Inductive. Used to remember this by "Eli" the "ice" man. "(e) Voltage (l) (Inductive circuit) (i) current", the ,"(i) Current (c) (capacitive circuit) (e) voltage, man.
No. Touching a live electric current is never a good idea.
You connect a galvanometer in series with the circuit being measured, because the galvanometer is a form of ammeter, although an extremely sensitive one, and ammeters measure the current in a series circuit.
False
false
false
In an electric circuit, the ground does not prevent current from flowing. Instead, it provides a safe path for electrical current to return to the earth in the event of a fault. It's a protective measure to prevent electrical shock hazards by maintaining the voltage stability in the circuit. The normal operation of the circuit isn't affected by the grounding system.
No, cells do not push electric current harder around a circuit. Electric current is driven by the voltage difference between the cells. Adding more cells in series increases the voltage, which can result in more current flowing through the circuit, but the cells themselves do not push the current harder.
True
False. The total current in a parallel sub-circuit where all resistors have the same value cannot be found by multiplying the current by the number of resistors. In a parallel circuit, the total current depends on the individual resistor values and how they affect the overall resistance of the circuit.
False. A device that is used to open the circuit when the current flow is too great is a circuit breaker or fuse.A disconnect switch is a manual device that isolates or turns off the load.
Yes. Most flashlights have a series circuit involving a battery, a switch, and a bulb. More complex variants might have two bulbs in parallel, two or more bulbs on two switches, etc. but the basic principle is a series circuit - turn the switch on and the bulb illuminates.
false
Inductive. Used to remember this by "Eli" the "ice" man. "(e) Voltage (l) (Inductive circuit) (i) current", the ,"(i) Current (c) (capacitive circuit) (e) voltage, man.
True. Ohm's law states the voltage is resistance times current.