What is the weight of 50x50x5 mm mild steel angle per metre length? Density mild steel is 7.85 g/cm3 Volume is 2x(4.5x0.5x100)+(0.5x0.5x100)=475 cm3 Weight is 7.85x475=3728.75 g (per metre).
Weight of 60x60x6mm Angle is 5.4 kg/m. So, 4 metre length, it will be 21.6 kg Total.
Formula for steel bar weight per meter = D2/162 where D is diameter of bar
The formula to calculate the weight of MS (Mild Steel) pipes per meter length is as follows: Weight per meter = (outer diameter - thickness) * thickness * 0.0246615 * 2.76, where the outer diameter and thickness are in millimeters. This formula takes into account the density of mild steel (7.85 g/cm³) and the conversion factor to get the weight in kilograms per meter. It is important to ensure that the units are consistent throughout the calculation to obtain an accurate result.
To calculate the weight per meter of a 45x45x5 mm angle, you first determine the volume of the angle. The formula for the volume can be approximated as the cross-sectional area multiplied by the length. The cross-sectional area of the angle can be calculated by considering the two legs and the thickness, and then multiplying by the length (1 meter). Finally, multiply the volume by the density of the material (typically for steel, it's around 7850 kg/m³) to get the weight per meter.
what the hell are you? isch das is das
The dimensions of the steel are required.
3 KG / Meter
The weight of a GI flat with dimensions 75x10 mm per meter length can be calculated as follows: 75mm x 10mm x 0.00785 (density of steel) = 5.8875 kg/meter.
What is the weight of 50x50x5 mm mild steel angle per metre length? Density mild steel is 7.85 g/cm3 Volume is 2x(4.5x0.5x100)+(0.5x0.5x100)=475 cm3 Weight is 7.85x475=3728.75 g (per metre).
Weight of 60x60x6mm Angle is 5.4 kg/m. So, 4 metre length, it will be 21.6 kg Total.
The weight of steel can vary depending on the specific type and grade. However, a rough estimate for the weight of 8mm diameter steel rod can be calculated using the formula: Weight = (Diameter^2) x 0.006165, where the weight will be in kilograms per meter.
The weight of a 12mm diameter mild steel (MS) rod per meter length can be calculated using the formula: Weight = (Diameter^2) x 0.00617 where Diameter is in mm. Therefore, for a 12mm diameter MS rod, the weight per meter length would be approximately 0.888 kg.
Formula for steel bar weight per meter = D2/162 where D is diameter of bar
.4017
3.85
The formula to calculate the weight of MS (Mild Steel) pipes per meter length is as follows: Weight per meter = (outer diameter - thickness) * thickness * 0.0246615 * 2.76, where the outer diameter and thickness are in millimeters. This formula takes into account the density of mild steel (7.85 g/cm³) and the conversion factor to get the weight in kilograms per meter. It is important to ensure that the units are consistent throughout the calculation to obtain an accurate result.