Transistor=Transfer+Resistor. When Transistor operates in active region its input resistance is high and output resistance is low. So,We can consider transistor as a device which transfers its resistance from high to low. And by this property transistor amplifies input signal.
The input of a transistor is typically referred to as the "gate" in a field-effect transistor (FET) or the "base" in a bipolar junction transistor (BJT). In both cases, the input controls the flow of current through the transistor, allowing it to function as a switch or amplifier in electronic circuits. The gate or base receives the input signal that modulates the transistor's operation.
A small signal NPN transistor used for general purpose audio amplifiers and switching.
in bipolar transistors it is called the basein field effect transistors it is called the channel
A silicon transistor is a transistor made of silicon.
A transistor has three connection points. The connection points are base, emitter, and collector.
No.Di, or bi, means two. A diode, from the Greek di (two), and ode (path), has, rather obviously, two connections, which, in older ones (valves/thermionic diodes), were called electrodes.A transistor has three connections (so it would make, at least grammatic, sense to call it a triode).
transistor. This word is a blended form of transfer of resistor. The legs of transistor (collector, emitter,base) transfer the resistance. So it is called as transistor
Its not!
Transistor is called Bi-Polar device because the current can be flow due to electron and holes, hence it is called bipolar.
The correct spelling is transistor. The definition of transistor is a portable radio that uses circuits that contain transistors instead of vacuum tubes. It is a semiconductor device that has three connections.
Transistor=Transfer+Resistor. When Transistor operates in active region its input resistance is high and output resistance is low. So,We can consider transistor as a device which transfers its resistance from high to low. And by this property transistor amplifies input signal.
When the out from a transistor is the exact replic of the input signal then it is called unmodulated signal i e. there will not be any change in frequency voltage power etc
The input of a transistor is typically referred to as the "gate" in a field-effect transistor (FET) or the "base" in a bipolar junction transistor (BJT). In both cases, the input controls the flow of current through the transistor, allowing it to function as a switch or amplifier in electronic circuits. The gate or base receives the input signal that modulates the transistor's operation.
A small signal NPN transistor used for general purpose audio amplifiers and switching.
MOSFET is Metal Oxide Semiconductor Field Effect Transistor. IGFET Insulated Gate Field Effect Transistor. But these expressions are practically synonyms.
Even though it has only two types of charge carriers we will not call it as a diode but a transistor since it is a three terminal device.