0
What else can I help you with?
Can you glow led by using neutral and earth?
If you connected neutral and earth (ground) to each lead in an LED and it glowed then this would be evidence of a ground fault.
What happens if capacitor and inductor connected in parallel with led?
Without knowing the signals driving such a circuit and the tuning of the tank in the circuit it in not possible to give an exact answer. However assuming the tank is tuned to RF the behavior of the tank and LED should be effectively independent: the tank will respond to the RF in the signal and the LED will respond to the DC in the signal. The behavior would be different if the tank was tuned to low audio frequencies.
Why are LED connected to a circuit not a light bulb?
The power consumption of the led is very low and the life of LED bulb is high. Hence LED's are used as cost saving and energy saving measure and not hte conventional incadscant indicator bulbs. ...
What happens when the parts of the circuit are properly connected?
oppen circuit
What does a circuit board look like?
A circuit board consists of numerous electronic components, depending on the application, these components can be in the thousands or in the ten's, therefore circuit boards vary in numerous sizes, all connected using very fine electrical connection strands.
What happens if ht leads connected in wrong order?
Engine won't start
What happens when led is connected in series with capacitor?
As the capacitor charges the led will dim until it's minimum operational voltage is reached and it goes out.
What happens when a battery is connected wrong on a 1997 mercury villager?
you can blow fuses or the battery Possible computer damage.
What would happen if the LED was connected the wrong way round?
If the LED was connected the wrong way, you would have bent some pins to have forced it to go in the socket the wrong way since it is designed to go in one way. Also, since you forced it and got it out of line, you may have broken the pins and may have a horrible time getting them out. You may need to take the unit into a shop and have someone that knows what they are doing fix it. If the LED was connected the wrong way round it would not light. There are 3 ways of identifying which lead is which. The cathode is the shorter lead. The cathode has the bigger internal plate. The cathode is on the side of the package that has a flat (D).
What is the meaning of led in wrong ways?
led in wrong ways
What happens if charger is connected to wrong terminals?
If a charger is connected to the wrong terminals, it can cause reverse polarity, potentially damaging the device or battery being charged. This may lead to overheating, short circuits, or even fires. In some cases, built-in protection circuits may prevent damage, but relying on this is not advisable. Always ensure the charger is connected properly to avoid these risks.
Why are the LED lights flickering when connected to a dimmer switch?
LED lights may flicker when connected to a dimmer switch because some dimmer switches are not compatible with LED technology. This can cause the LED lights to receive inconsistent power, leading to flickering.
What does cross connected mean?
In electrical terminology it means that wires have been connected under the wrong terminals.
What happens when you put a tire on wrong?
why/how do you think you put it on wrong?
How is archduke franz connected to the Great War?
Archduke Franz was connected to the great war in that his assassination led to the war.
What is the meaning of in what ways?
led in wrong ways
What does it mean if your balls are still connected to penis?
somthings wrong
