answersLogoWhite

0

The power consumption of the led is very low and the life of LED bulb is high. Hence LED's are used as cost saving and energy saving measure and not hte conventional incadscant indicator bulbs. ...

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How does a flaslight work?

A flashlight works by converting electrical energy from batteries into light energy through a bulb or light-emitting diode (LED). When the switch is turned on, the circuit is completed, and the electrical current flows through the bulb or LED, causing it to emit light.


How would the circuit inside a flashlight work?

Flashlight by light, battery, circuit, a hood and a reflective cup, circuit storehouse, switch, etc, the basic principle is the current from the battery, and then to the circuit, after adjusting circuit voltage and current, and then output to the light source for lighting.


How can I change a LED ceiling light?

To change a LED ceiling light, first turn off the power to the light fixture at the circuit breaker. Next, remove the old light bulb or fixture by twisting it counterclockwise. Then, insert the new LED light bulb or fixture by twisting it clockwise until it is securely in place. Finally, turn the power back on at the circuit breaker and test the new LED light to ensure it is working properly.


How can I change an LED ceiling light?

To change an LED ceiling light, first turn off the power to the light fixture at the circuit breaker. Next, remove the old light cover and unscrew the old LED bulb. Replace it with a new LED bulb of the same size and wattage. Finally, screw the new bulb in place, replace the light cover, and turn the power back on to test the new light.


What is the full form of LED BULB?

An LED bulb simply means a Light Emitting Diode Bulb—a bulb that uses LED technology to produce light efficiently.


What is a circuit that uses only one device?

A simple circuit that uses only one device would be a battery connected to an LED light. The battery provides power to the LED, causing it to light up. This type of circuit is commonly used in handheld flashlights.


What is a wiggy in electrical?

A wiggy is a type of voltage tester used to check for the presence of voltage in a circuit. It typically consists of a neon light bulb or LED and two probes for making contact with the circuit. The light will illuminate or the LED will light up if voltage is present.


How do I properly install a screw-in LED light fixture?

To properly install a screw-in LED light fixture, first turn off the power to the light fixture at the circuit breaker. Then, unscrew the old light bulb and remove the fixture. Screw in the new LED light bulb securely. Turn the power back on and test the light to ensure it is working properly.


The 4017 integrated circuit is a type of what circuit?

led to 250 watts bulb


What is the process of a flashlight?

A flashlight works by converting electrical energy from a battery into light energy through a light bulb or LED. When the switch is turned on, the circuit is completed, allowing the current to flow through the bulb or LED, generating light. The reflector and lens help focus and direct the light beam.


How can I repair a LED light bulb?

Repairing a LED light bulb is not recommended as they are designed to be replaced rather than repaired. If the LED light bulb is not working, it is best to replace it with a new one.


What is the load of a flashlight circuit?

The load of a flashlight circuit is the component that consumes electrical power, typically an LED bulb or an incandescent bulb. The load transforms electrical energy into light energy to illuminate the flashlight. It is an essential part of the circuit that determines the brightness and performance of the flashlight.