0
What else can I help you with?
What happens if an LED is connected wrong?
It will be reverse biased and will not light.
Can you glow led by using neutral and earth?
If you connected neutral and earth (ground) to each lead in an LED and it glowed then this would be evidence of a ground fault.
Why are LED connected to a circuit not a light bulb?
The power consumption of the led is very low and the life of LED bulb is high. Hence LED's are used as cost saving and energy saving measure and not hte conventional incadscant indicator bulbs. ...
What does a circuit board look like?
A circuit board consists of numerous electronic components, depending on the application, these components can be in the thousands or in the ten's, therefore circuit boards vary in numerous sizes, all connected using very fine electrical connection strands.
Will a LED shine brighter if it is connected to a higher voltage?
A LED has a forward voltage drop dependent on it's composition. It is fairly constant within a small range of current flow. If the voltage is too high and the current is not limited, the LED will burn out. The brightness can be varied by varying the available current, but the voltage across the LED remains virtually the same.
Why are the LED lights flickering when connected to a dimmer switch?
LED lights may flicker when connected to a dimmer switch because some dimmer switches are not compatible with LED technology. This can cause the LED lights to receive inconsistent power, leading to flickering.
How is archduke franz connected to the Great War?
Archduke Franz was connected to the great war in that his assassination led to the war.
What happens if an LED is connected wrong?
It will be reverse biased and will not light.
Why does a Led have a 470 resistor connected to the LED?
A: That resistor is there to limit the current to the LED it can be any value if the voltage is decreased or increased or no resistor if the voltage across the led is equal to the forward voltage drop.
Where do you use the current limiting resistor?
in a flashing led circuit connected in series
What conclusions can be drawn from the lighting of the led?
The lighting of the LED indicates that there is an electric current flowing through the circuit and that the LED is functioning properly. It shows that the circuit is complete and the components are properly connected to allow for the illumination of the LED.
NIC card amber LED is continuously flashing quickly?
If the patch card is connected with the mgmt port then this kind of amber LED glows...
What happens when led is connected in series with capacitor?
As the capacitor charges the led will dim until it's minimum operational voltage is reached and it goes out.
How was North Africa important in World War 2?
It was connected to a river that led to Asia.
Can you glow led by using neutral and earth?
If you connected neutral and earth (ground) to each lead in an LED and it glowed then this would be evidence of a ground fault.
Why do LED lights flicker when connected to a dimmer switch?
LED lights flicker when connected to a dimmer switch because the dimmer switch is designed to work with incandescent bulbs, which have a different way of producing light compared to LEDs. The dimmer switch may not be compatible with the electronic components in the LED lights, causing them to flicker.
Why are LED connected to a circuit not a light bulb?
The power consumption of the led is very low and the life of LED bulb is high. Hence LED's are used as cost saving and energy saving measure and not hte conventional incadscant indicator bulbs. ...
