If the circuit of an electromagnet is broken, the flow of electric current ceases, which results in the loss of the magnetic field generated by the electromagnet. Without the current, the electromagnet no longer exerts a magnetic force, causing any objects it was holding or affecting to be released. This interruption can occur due to a switch being turned off, a wire being disconnected, or a component failing.
In a series circuit each light completes its part of the circuit and connects to the next light. So, if one light fails, the circuit is broken and the flow of current to all lights must stop.
no, the circuit won't complete
Answer: it will burn out **Explain:**The same current flows through each part of a series circuit. If the circuit is broken at any point there won't be any current that will flow. In this case, if one of the bulbs blew out, the other bulb would not be able to light up because the flow of electric current would have been interrupted. #Carryonlearning
A voltage error circuit is called an error amplifier and happens when there are discrepancies between the voltage output and the reference voltage. A current error circuit happens when there is a disruption of flow in an ammeter.
oppen circuit
Then the current will stop flowing.
If the track of the current is broken in a series circuit, the circuit will be interrupted and no current will flow. The components in the circuit will not receive any power and will not function until the circuit is repaired.
the circuit is broken.
In a series circuit, when a light bulb is broken, it creates an open circuit which stops the flow of current throughout the circuit. As a result, all the other light bulbs in the circuit will also stop working because they are all connected in a series.
In a series circuit, all bulbs are necessary to complete the circuit. If one bulb goes out, the circuit is broken, so none of the bulbs would light up.
When a fuse blows, it essentialy breaks the circuit. So the current can no longer flow, this is used as a safety measure.
A multimeter will help you find if the wiring circuit is broken.
A circuit with a broken wire is an open circuit, meaning there is a gap in the pathway for electricity to flow. This interruption stops the current from completing its loop, resulting in a non-functional circuit. Fixing the broken wire will restore the connection and allow the circuit to operate properly.
when the wire is disconnected from the dry cell you feel not hot
In a series circuit each light completes its part of the circuit and connects to the next light. So, if one light fails, the circuit is broken and the flow of current to all lights must stop.
The cast of The Broken Circuit - 1915 includes: Helen Holmes as Helen
When a switch is closed the path through the circuit is continuous.