answersLogoWhite

0

Capacity to the equivalent of the battery is reduced - that is, you'll run out of charge quicker but the voltage delivered will still be the same.

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about Engineering

Three identical bulbs are connected in parallel across a 12-V battery If one of the bulbs were removed from its socket then the potential difference measured across the empty socket would be?

12V. Every resistor in a parallel circuit shares the same voltage. It is the current that gets divided.


When the resistor removed from a parallel connection of the circuit whether the resistance increase or decrease?

if we remove a resistor from the parallel connection the effective resistance value will be increased.


What happens in a parrel circut if one ligt bulb is removed?

Nothing. All the light bulbs in your house are connected in parallel. In a parallel circuit the same voltage appears across all the loads, and the supply voltage is nearly constant, so if one bulb is switched off it makes no difference to the others.


What happen to the parallel circuit if one resistance is removed?

assume the following configuration: battery connected to 2 parallel resistors with an ammeter in series with the battery... observe the current measurement ... remove one of the resistors .... observe the current again, it will have decreased: if the resistors were of equal value, the current will decrease to half of its original value when one of the resistors is removed. Mathematics: V=IR (V- voltage, I - current, R - resistance in a parallel circuit, R=(R1*R2)/(R1+R2) where R1 and R2 are the values of resistance of the resistors. Before removal- Ib=V*(R1+R2)/(R1*R2) After removal (assume R2 is removed)- Ia=V/R1 so Ia/Ib=(R1*R2)/(R1*(R1+R2)) or Ia=Ib*(R2/(R1+R2) if R1=R2 then Ia=Ib*R2/(2*R2) or Ia=Ib/2 so the current after is 1/2 of that before.


How can an ohmmeter be damaged?

By connecting it to a circuit with the power still applied. Ohm meters work best when the component under test is removed from the circuit to eliminate parallel paths of current through other components.

Related Questions

What happens if one of the components in a series or parallel circuit i removed or is defective?

In a series circuit, if one component is removed or defective, the circuit will be broken and no current will flow. In a parallel circuit, if one component is removed or defective, the current will simply bypass that component and continue to flow through the other branches.


What happens to the current in a circuit if a volt battery is removed and is replaced by a 3 volt battery?

The battery cannot be removed quickly! Inductance of the wiring stores energy and keeps the current flowing and decaying smoothly. There will be an opposite polarity, higher voltage pulse on the battery terminals, limited by the circuit capacitance only.


What happens to the other bulbs when a bulb from a parallel circuit is removed?

Because circuit don't break unlike in series.That means rest of the component are getting the voltage across them.


What happens to the current in a circuit if a 1.5-volt battery is removed and is replaced by a 3-volt battery?

The battery cannot be removed quickly! Inductance of the wiring stores energy and keeps the current flowing and decaying smoothly. There will be an opposite polarity, higher voltage pulse on the battery terminals, limited by the circuit capacitance only.


What happens to the current in a circuit if a 1.5 volt battery is removed and is replace by 9 volt battery?

Current will go up by a factor of 6 times in that scenario.


What is the difference between parallel and series?

If you are referring to an electrical circuit, a series circuit is wired in such a way that if one object is removed from the circuit, the circuit is broken and everything within the circuit loses power. In a parallel circuit different components of the circuit can be removed without disabling power to the rest of the devices within the circuit.


What would happen if a battery is removed from a circuit?

It wil be on


What happens in parallel circuit if one load is broken or missing?

it won't flow


What happens to the current in a circuit if a 1.5 volt battery is removed and is replaced by a 9 volt battery?

If a 1.5 volt battery is replaced by a 9 volt battery in a circuit, the current flowing through the circuit will likely increase. This is because the higher voltage of the 9 volt battery will provide more electromotive force, pushing more current through the circuit, assuming the resistance remains the same.


When one load is removed from a parallel circuit the total resistance decreases?

No, the total resistance increases.


Three identical bulbs are connected in parallel across a 12-V battery If one of the bulbs were removed from its socket then the potential difference measured across the empty socket would be?

12V. Every resistor in a parallel circuit shares the same voltage. It is the current that gets divided.


When the resistor removed from a parallel connection of the circuit whether the resistance increase or decrease?

if we remove a resistor from the parallel connection the effective resistance value will be increased.