as per ohm law current is directly proportional to the applied voltage and inversely proportional to the resistance now u can calculat according to the formula by by putting the considered value and then by changing the values according to the question u will get the result to Analise the difference.
It is halved. coz voltage=current * resistance
The current in the circuit will be decreased by half. Ohm's law states V=IR so, I=V/R. If R is doubled, then I= V/2R.
If you add a second resistor, the resistance of series circuit will increase.
The circuit becomes a pure resistance circuit where current and voltage are in phase with each others.
An electron traveling through the wires and loads of the external circuit encounters resistance.
It is halved. coz voltage=current * resistance
When the frequency is doubled, the resistance of a circuit remains unchanged. Resistance in a circuit is independent of frequency and is determined by the material and physical dimensions of the resistor.
In a parallel circuit, the total resistance remains the same when the voltage applied is doubled. Each branch in the parallel circuit will experience the same increase in voltage, but their individual resistances will remain constant.
If resistance is doubled in a circuit with constant voltage, Ohm's Law (V=IR) states that current (I) would be halved since the voltage is constant. This is because the relationship between resistance and current is inversely proportional.
The current in the circuit will be decreased by half. Ohm's law states V=IR so, I=V/R. If R is doubled, then I= V/2R.
it will cause a Short Circuit
If the voltage in a circuit were doubled, the current would also double according to Ohm's Law (I = V/R), assuming the resistance in the circuit remains constant. This is because current is directly proportional to voltage when resistance is held constant.
If you add a second resistor, the resistance of series circuit will increase.
The circuit resistance is likely to gradually drop and in such case it will cause the circuit to burn down.
When you add resistance to a circuit, current goes down. Ohm's Law: current = voltage divided by resistance.
resistance is directly proportional to wire length and inversely proportional to wire cross-sectional area. In other words, If the wire length is doubled, the resistance is doubled too. If the wire diameter is doubled, the resistance will reduce to 1/4 of the original resistance.
It shortens