a generator is built in three phases
Generator coils generate the voltage, motor coils use the generated voltage.
To select a diode for a 17.5 kVA three-phase generator, consider the generator's output current, which can be calculated using the formula: Current (I) = Power (kVA) × 1000 / (√3 × Voltage). Ensure the diode's current rating exceeds this calculated value, typically using a diode rated for at least 1.5 times the maximum current for reliability. Additionally, select a diode with a reverse voltage rating comfortably above the generator's peak voltage to avoid breakdown.
Into units of what?
Just use 2 of the wires instead of 3.
Rephrase your question so that it makes sense.
Generator coils generate the voltage, motor coils use the generated voltage.
pls telme 3phase 7.5kwe enerater pric 10 hp g
The terminology for the type of connections you describe is, three phase four wire. These changes are made in the generators junction box. In this junction box you will find a series of taps that can be re configured to change the many voltages that the generator can produce.
No! It doesn't matter if you use two legs or three. The output is 5000 watts
Which starter is best for 7.5 hp 3phase motor?Read more: Which_starter_is_best_for_7.5_hp_3phase_motor
120 degrees
To run a 3phase separator in 1440 depends on the fluid type and the flowing conditions. It is then controlled by pressure and the fluid levels that in the vessel.
Into units of what?
the three phase dc motor never seen yet motor eaither 3phase m/r or dc motor.
60.4
1400rpm
570amps on 3phase 415volts