A light load refers to a relatively small amount of weight or force that is manageable and easy to handle. In various contexts, such as Weightlifting or transportation, it indicates that the load does not exert significant strain on the individual or system involved. Light loads are typically associated with lower stress levels and reduced risk of injury or fatigue.
No, the transformer has to supply the load, whether it is light or heavy.
no
A load bank might be permanently installed when the generator has a large generating capacity and the connected load is very light.
A static load is the effect of gravity on an object or structure.A dynamic load is the forces that move or change when acting on a structure.Example of a dynamic load:Force of wind or the weight of a truckExample of a static load:Weight of a bridge
On load switching is when a switch can be operated whilst current is still passing through the switch (i.e. it is on load) Offload switching is when a switch is operated whilst there is no current through the switch (i.e. it is offload)
No, the transformer has to supply the load, whether it is light or heavy.
no
the speed N is inversely proportional to armature current I. At light loads this current is very small. Hence motor will run at very high speed when started on no load/light load.........
In a light switch circuit, the line is the wire that brings power into the switch, while the load is the wire that carries power from the switch to the light fixture. The line wire is typically connected to the power source, while the load wire is connected to the light fixture.
In a circuit, the line connection carries the electrical current from the power source to the light switch, while the load connection carries the current from the light switch to the light fixture. The line connection is typically connected to the hot wire, while the load connection is connected to the wire that leads to the light fixture.
A load is device where the work produced will be dissipated. It could be mechanical, heat, light, sound, magnetism, etc.
By the lighting load it carries, in amps.
A load bank might be permanently installed when the generator has a large generating capacity and the connected load is very light.
The load in a torch is tehb thin tungsten wire in the bottom of the torch. It converts electrical energy into light energy.
The load is essentially what consumes electrons. For example a load on a light circuit would be a bulb. Therefore, if you don't hook up a load you aren't doing anything. It is like turning on a light switch without a bulb. It may give you some minor exercise, but it doesn't do anything useful.
false
Load of shite