A put diode is a type of semiconductor device that allows current to flow in one direction while blocking it in the opposite direction, similar to a standard diode. However, the term "put diode" may be a typographical error or confusion with "put option" in finance or other specific diodes like "Zener diode" or "Schottky diode." If you're referring to a specific application or context, please clarify for a more accurate explanation.
If you put a diode in series with an AC sine wave that goes plus and minus, it will cut off either the positive or negative portion of the waveform, depending on the direction of the diode in circuit. So in effect you have a pulse equal to one half cycle of the sine wave.
gunn diode is transfered electron device & PIN diode is semiconductor device
whether we know that p-n diode is real diode. But still in case of semeconductor we see then silics is real diode.
Bulk resistance of diode depends on how it is biased. The bulk resistance of a diode is the approximate resistance of the diode when it is forward biased.
Another diode with similar specifications.
Diodes allow current to flow in only one direction, and if the diode is put a certain way around in the circuit such that it DOES allow current to flow, then it is forward biassed. If the diode is put in the circuit so that it doesn't allow the current to flow, then it is reverse biassed.It is just a term used to describe the orientation of the diode relative to the (conventional) flow of current through the circuit.
The most straightforward and unbiased way is to remove the diode from the circuit and check it with a diode tester. Alternatively, if the diode is shorted, the bridged will measure shorted. If it is open, running the generator and monitoring the output with an oscilloscope will reveal a missing phase. One example of an open diode problem in an automobile alternator application is that the alternator will put out enough current to keep the system fail light off, but not put out enough current to meet rated output load.
zener diode :zener diode operates under reverse bias voltageideal diode :ideal diode operates under forward bias voltage
yes, diode can be used as rectifier diode to convert ac to dc
The read type diode are called impatt diode
A diode is used primarily as a Rectifier
Laser diode
zener resistance of a zener diode is the resistance of the zener diode but which is the resistance of a diode
If you put a diode in series with an AC sine wave that goes plus and minus, it will cut off either the positive or negative portion of the waveform, depending on the direction of the diode in circuit. So in effect you have a pulse equal to one half cycle of the sine wave.
A Diode will pass the electrical current into one direction, and will produce high resistance in the opposite direction. To check a diode, use an Ohm-Meter or a "multi meter", and set to measure resistance "Ohm", in the 1k Scale. You will have two leads in the ohm meter + and - (Red and Black) If you measure the resistance in one direction ( red lead touching one of the diode leads , and the black is touching the other lead ) , and you found a low resistance in one direction, and a very high resistance in the other direction ( by reversing the red/black leads) , this diode should be ok. If you find low resistance in both directions, this diode is shorted, and is damaged If you find high resistance in both directions, this diode is open circuit, and is damaged
A light Emitting Diode.... Light Resistat Diode ...
Laser diode