answersLogoWhite

0

Its a diode electricity add me on 2go samuel7447 and get more answers ...

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Engineering

The grid in a high-vacuum triode is usually kept?

negative


In which year first successful diode and triode vacuum tubes invented?

The first successful diode vacuum tube, known as the Fleming valve, was invented by John Ambrose Fleming in 1904. The triode vacuum tube, which allowed for greater amplification of electrical signals, was developed by Edwin Howard Armstrong in 1906. These inventions were pivotal in the development of electronics and telecommunications.


What is the triode gauge?

The triode gauge is a device used to measure low pressures, typically in the range of 10^-3 to 10^-9 Torr. It operates by using a triode configuration, where a cathode emits electrons that are attracted to an anode, and the current flow is influenced by the presence of gas molecules in the vacuum. The gauge's output signal is proportional to the ionization of the gas, allowing for accurate pressure readings. It is commonly used in vacuum technology and scientific research.


What is a vacuum tube that has three electrodes?

A vacuum tube with three electrodes is commonly known as a triode. It consists of a cathode, an anode, and a control grid, allowing it to amplify electrical signals. The control grid modulates the flow of electrons from the cathode to the anode, enabling the triode to function as an amplifier or a switch in various electronic applications. Triodes were essential in early electronics but have largely been replaced by transistors in modern circuits.


What is anode resistance of triode?

Anode resistance of a triode, also known as plate resistance, refers to the dynamic resistance seen at the anode (or plate) terminal of the triode in response to changes in anode voltage while keeping the control grid voltage constant. It is a measure of how much the anode current changes with a change in anode voltage. This resistance is crucial for determining the voltage gain of the triode, as a higher anode resistance typically leads to greater amplification. It is usually denoted as ( r_a ) and can vary with the operating point of the triode.

Related Questions

What is an electronic vacuum valve with three electrodes?

Triode


The grid in a high-vacuum triode is usually kept?

negative


Who invented the triode?

In 1906 Lee De Forest, an American engineer (often called the "father of radio"), invented the three-element vacuum tube, or triode.


What is a crystal triode?

A crystal triode is the old term for transistor. Crystal diodes were well established by the time transistors were invented, so using vacuum tube terminology, the logical name for a diode whose current could be controlled by a third element was "crystal triode".


In which year first successful diode and triode vacuum tubes invented?

The first successful diode vacuum tube, known as the Fleming valve, was invented by John Ambrose Fleming in 1904. The triode vacuum tube, which allowed for greater amplification of electrical signals, was developed by Edwin Howard Armstrong in 1906. These inventions were pivotal in the development of electronics and telecommunications.


How many KB is a vacuum tube?

Kilobytes and vacuum tubes are not in the same category. At best, a twin triode vacuum tube is a single flip-flop and can hold 1 bit of information, making a vacuum tube about 0.000122 of a kilobyte.


What is an equivalent diode of a triode valve?

Hard to answer this one.The triode is a diode with a control electrode (the grid) added.The only useful answer is that a triode is a voltage-controlled doide.Try asking the question so that it can be answered more usefully.


What is the triode gauge?

The triode gauge is a device used to measure low pressures, typically in the range of 10^-3 to 10^-9 Torr. It operates by using a triode configuration, where a cathode emits electrons that are attracted to an anode, and the current flow is influenced by the presence of gas molecules in the vacuum. The gauge's output signal is proportional to the ionization of the gas, allowing for accurate pressure readings. It is commonly used in vacuum technology and scientific research.


Explain briefly about field effect transistor?

Think of a solid state triode vacuum tube, the mathematical model is almost identical.


What are the function of vacuum tubes?

The earliest vacuum tubes were used as direct display devices, and also as rectifiers of alternating current. In 1906 Lee De Forest invented the triode valve, from which all subsequent vacuum devices have devolved. The triode allowed the electronic amplification of electrical signals, and from this, our modern communications industries have developed. Amplifiers may be made into oscillators by applying feedback. The triode may also be made into a switch (of various sorts), and this is the base on which the digital industries are based. This craft embodies the technologies of electronics, combined with Boolean algebra and signal theory. Quite complex assemblies of valves may be combined, such as triode-hexode combinations. Very large power may be controlled by the triode principles. Modern Thyristor assemblies - today's solid-state equivalent of the vacuum tube - may be used to control Megawatts of power in High Voltage Direct Current transmission systems.


What is a vacuum tube that has three electrodes?

A vacuum tube with three electrodes is commonly known as a triode. It consists of a cathode, an anode, and a control grid, allowing it to amplify electrical signals. The control grid modulates the flow of electrons from the cathode to the anode, enabling the triode to function as an amplifier or a switch in various electronic applications. Triodes were essential in early electronics but have largely been replaced by transistors in modern circuits.


What is triode valve?

A triode valve is a three-electrode electronic device. It can amplify, oscillate or act a a switch. Most commonly, its three electrodes are contained in a completely-evacuated envelope (a near-perfect vacuum). The envelope may be of glass, ceramic or a metal-glass or metal-ceramic construction. Most commonly, the electrons needed for operation are produced by a heated filament or cathode. It is possible to do without the filament/cathode, but such devices are uncommon. The heated filament/cathode defines this as a *thermionic* triode. Some triodes do not use a pure vacuum. Instead, they use low-pressure gas, or mercury vapour, to allow them to operate at higher currents and lower voltage drops than vacuum triodes.