Viscocity should be 90. Other contents should not harm - gears
80 /90 gear oil but I am having trouble finding where to add as others are. The hydrostatic drive transmissions might take 80/90, but the manual 5/6 speed transmissions take Bentonite Grease. Try Peerless/Tecumseh part# 788067B. There are no fill or drain plugs. You split the case open. The grease is similar in consistency to wheel bearing grease, but is high-temp, water resistant, extreme pressure grease.
Spur gears give 180 degree drive, and worm gears give 90 degree drive.
Sand mullers break up sand after it has been used in molds to facilitate sandcasting. By effectively breaking up the sand, it can be reused. The worm on a motor or on the "driven" side of the device will engage with a worm gear. The worm rotates continuously, and the spiral cut gears "worm" their way "along" the axis of the gear. The worm gear (or spur gear) engages with the worm and rotates continuously as well. Also, the worm gear will translate the rotary motion of the worm by 90 degrees. It is fairly easy to see how the unit works if you look at some pictures or drawings. Hey, how about some animation or video? Got a couple of links.
A bevel gear typically has a conical shape, with its teeth angled along the conical surface. This design allows for the transfer of motion and torque between shafts that are oriented at an angle, usually 90 degrees to each other. The teeth can be straight or spiral, with spiral teeth providing smoother and quieter operation. Overall, bevel gears are characterized by their distinctive sloped profiles and tooth arrangements.
worm gears are used in machines that need high gear ratiosspoonsWorm gears are found in some kinds of 90 degree gearing junctions, generally with a large change in gearing ratio.For example, many tillers have worm gears between the input shaft and the crosswise tines.Since a motorcycle doesn't need a true differential, it may also have a worm gear connecting the drive shaft to the rear wheel.An adjustable end wrench (Crescent Wrench) also has a worm gear for adjustment, and it is easily visible.There are some devices such as a telescope stand that have precision adjustment with a worm gear, especially if the only adjust through a fraction of a circle.Worm gears are used to reduce speed. They can be found in factories. Google it to buy one.
Yes, you can use 75w-90 gear oil instead of SAE 90 gear oil
Manual says to use SAE 75w-90 or SAE 80w-90 gear oil
SAE 90
sae 90
Sae 75w/90
20W-50 is equal to Sae 90 W.
One liter for the Manual Transmission and one liter for Transfer case.
SAE 90 oil is equivalent to an ISO viscosity grade of approximately 220. It is commonly used in applications requiring a heavier gear oil, such as in automotive differentials and manual transmissions. Additionally, SAE 90 oil can be compared to certain grades of 85W-140 oil, though the latter may have different performance characteristics due to its broader temperature range. Always consult manufacturer specifications for optimal performance.
According to the manual of the 2008 C-14, it requires API "GL-5" Hypoid gear oil, either SAE 90 (above 41 Fahrenheit) or SAE 80 (below 41 Fahrenheit). A "GL-6" rated hypoid gear oil may also be used.
SAE 80W-90 GL-5 gear lubricant, Full time 4x4 is SAE 10W30 or 40 engine oil.
The manual transmission uses SAE 80-90 weight gear oil.
i believe you can using either sae 80w 80w90 75w/90