What is plate earthing procedure?

Answer 1

pipe earthing is done outside the tower, a hole of required diameter and depth is excavated and a pipe filled with coke and salt is put inside that hole which will be connected to the earth strip eventually connecting to the foot of the tower.

The other method of tower earthing is counterpoise in which galvanised strip of wires is connected to the foot of the tower and is being earthed to a depth at some distance.

Hope this answer work for you..

mohit sharma

Answer 2

In plate earthing we make chamber whose depth should be app. 2.5 to 3 mtr and dia should be app. 600 mm(as per plate size).we insert a cu/GI plate as per required size (app. 600x600x3/5) and two cu/GI strip should be attached vertically with this plate which should be properly bolted.Among these strips we fixed a GI pipe whose dia. app. 2.5"placed centrally for filling water.Then fill salt,

coal and soil in this chamber.

Finally make a flap on this chamber for protection and maintenance work

Answer 3

the wire comes from 3metre deapth from the ground is called earthing.

the wire comes from the plate to the ground

Answer 4

describe the plate earthing procedure