0
What else can I help you with?
What is the minimum acceptable reading for magger test for 480v motor?
if check voltage is 2000v then acceptable range is 400
Acceptable voltage drop for 3 phase 415 volt motor?
The voltage drop should not exceed 3% on a feeder or branch circuit.
What are the acceptable power ranges for 480 vac equipment?
All electrical equipment, regardless of the voltage, should have a voltage supply that is no more than plus or minus 5 per cent of the equipments stated voltage requirement.
What is the acceptable voltage higher than 480v for a 480v inverter?
The voltage range should be marked on the case but without that information a 5% increase can be assumed, so 504 v.
What is regulation of a transmission line?
Regulation has to do with keeping the voltage at a desired value. This is often put in a per unit value, which you can think of as a percent of nominal. So if the desired voltage is 34.5kV, and the actual voltage is 33.8kV, the voltage is .98 per unit. There are regional and national rules on how low or high voltage can be. If the voltage strayes from this, it must be regulated back to an acceptable value.
What is the acceptable range of ac voltage at an outlet?
The acceptable range of ac voltage at an outlet is from 115 to 120 volts. The utility company has a mandate to keep the voltage within a 10% fluctuation range. The catch is 10% from what set point voltage.
What is the minimum acceptable reading for magger test for 480v motor?
if check voltage is 2000v then acceptable range is 400
What does error code 23 mean Plymouth Voyager 1999?
CODE 23** Indicates that the air temp sensor input is below the minimum acceptable voltage or sensor input is above the acceptable voltage.
What is the acceptable percentage of voltage acceptable variance that most appliances will accept?
When doing voltage drop calculations the voltage to the connected devices should not drop below 3 % of the supplied voltage. <<>> "Most" appliances? that a tough one there is no standard. A few percent is no trouble, different appliances have different tolerances: no generalizations are possible.
Acceptable voltage drop for 3 phase 415 volt motor?
The voltage drop should not exceed 3% on a feeder or branch circuit.
Is 123.4 volts acceptable for house current?
In the United States, the standard voltage for household current is 120 volts, so 123.4 volts would fall within an acceptable range. However, fluctuations in voltage can occur, so it's always a good idea to consult a professional if you are experiencing voltage irregularities.
Is your site true?
It tries to attain an acceptable level of veracity.
Is I don't know an answer?
If you are asked a question and you do not know the answer, yes, it is an acceptable answer. If you do not know the answer to a question asked on this site, it is not acceptable to answer with "I don't know."
Is don't know an answer?
If you are asked a question and you do not know the answer, yes, it is an acceptable answer. If you do not know the answer to a question asked on this site, it is not acceptable to answer with "I don't know."
What is the minimum acceptable voltage on a 12 volt battery?
Fully charged should be around 12.8
What is the standard voltage on a building site?
110 volts
What are the acceptable power ranges for 480 vac equipment?
All electrical equipment, regardless of the voltage, should have a voltage supply that is no more than plus or minus 5 per cent of the equipments stated voltage requirement.
