0
For home units, the compressor is the outside, large box shaped unit that is usually on the side, or behind the house. It takes the freon gas from inside the home compresses it into a liquid, where it will be pumped back inside to the condensor. Compressing gas creates heat, so a fan draws air through the cooling coils on the side of the unit, and blows it out the top. It is important that these coils are kept clear of debris, and should be periodically sprayed off with a hose to knock off dust that may have accumulated.
Now that the freon gas is compressed, it gets pumped inside the house to the condensor, where the pressure falls, allowing the freon to return to a gas. This creates an endothermic reaction, drawing heat from the air. The condensor unit has a series of coils with fins that get very cold. The warm air in the house is blown over these coils, cooling it, and then through the ductwork of the house, and out through the registers.
What else can I help you with?
What is the difference between end suction pump and horizontal multi stage pump?
what is th different between end suction pump and singl stage pump and multistage pump
What the difference between ammonia compressor and air compressor?
the ammonia compressor differs slighlty from the air compressor in the fact that one uses a piston to create airable pressure frence while the outher uses a weighted fan atached to a fly wheel,eather would blow well
Where must a suction-line drier be placed in a heat pump?
In a heat pump system, the suction-line drier should be placed on the suction line, typically between the evaporator and the compressor. This location allows the drier to effectively remove moisture and contaminants from the refrigerant before it enters the compressor, protecting the compressor and ensuring efficient operation. Proper placement is crucial for maintaining system performance and longevity.
What is the difference between a single acting reciprocating pump and a double acting reciprocating pump?
it runs without fluctuation i.r continuous flow......
What is the difference between a sump pump and a utility pump?
A sump pump is submerged in a pit. It keeps house from flooding. A utiliity pump is used to pump water out of already flooded house, boat, pool, tank, etc....
What is difference between dynamic and volumetric compressor?
what is difference between dynamic and volumatic compressor
What is difference betweenrotar of centrifugal pump and compressor?
pump is used to handle liquid and compressor is used to handle gases. other difference include blade shape etc..
What is the difference between pumps and compressor?
pump is used to move liquid from one point to another, while compressor is used to compress and move gases from point to point.
Difference between compressor and pump rotor?
The only one difference in b/w compressor and pump rotor is impeller shroud width.Fluid is incompressible so impeller shroud width is not change and gas is compressible so impellers are tends to thin in width to the discharge side.
What is difference between fuel pump relay and compressor relay?
Pump relay is used to increase the pressure of incompressible fluids (i.e., density is constant for change in pressure) Compressor relay is used to compress the pressure of compressible fluids (i.e.,density varies with pressure)
What is different between pump and compressor?
pump is used to move liquid from one point to another, while compressor is used to compress and move gases from point to point.
What is difference between Hermetic Rotary Compressor?
this tool is not available
What is difference between reciprocating compressor and a rotary compressor?
A rotary compressor has screws or gears that compress a gas. A reciprocating compressor has a piston in a cylinder compressing the gas.
Whats the difference between proton pump inhibitors and Acid Pump Antagonists?
what is difference between inhibitor and antagonist
What is the difference in a pump and compressor?
they have different names A Pump is a mechanical device which transfers Liquid from a lower point to a higher point.Eg: Centrifugal pump,Rotary pump,Reciprocating pump. A Compressor is a high pressure mechanical device which basically compressors air/gas Well, a compressor compresses a gas and a pump moves a liquid. Compressors are often used in refrigeration applications where gas is transformed into a liquid and vice-versa, so the main task for the compressor is not to move the gas but to compress it.
What is the difference between a BLOWER and COMPRESSOR?
There is no difference. A blower is just a term used for a supercharger. A compressor is any machine that compresses a gas for many different purposes. A supercharger in its many forms is a type of compressor
Can you use compressor as pump?
It is an air pump.
