0
A three-phase, four-wire, system consists of three 'hot' conductors which are called line conductors, and a neutral conductor, sourced from a wye (or 'star') connected alternator or transformer. For this type of system, line voltages exist between line conductors, and phase voltages exist between any line conductor and the neutral conductor.
A three-phase, three-wire, system consists of three 'hot' conductors which are called line conductors, sourced from a delta (or 'mesh') connected alternator or transformer. For this type of system, the phases are connected between lines. Line voltages exist between line conductors, and these are numerically equal to the phase voltages.
What else can I help you with?
Should there be voltage between ground and each hot of a three phase power system?
There are two types of connections in three phase systems. One is a delta connection where there is no connection to ground, so you should not get any voltage to ground. This is classed as a three phase three wire system. In this type of system any one of the phase wires could become grounded and no one be the wiser. Code requires that grounding lights be added to a delta system to visually show what the phase condition is in relationship to ground. The other type of system is a wye or star point connection. This is classed as a three phase four wire system. In this type of connection the coil ends are all joined together and grounded. You would have voltage between the phases and a lower voltage to ground. The voltage to ground would be the phase voltage divided by 1.73.Yes. If there is no voltage between a hot and a ground, either the hot isn't really a hot or the ground isn't really a ground.AnswerThere is always a potential difference between a line conductor and ground, regardless of whether it is a three-wire system or a four-wire system. This is due to the capacitance between line and ground.
What is the voltage to ground of 13800 volts line to line?
On a three phase system with a line to line voltage of 13800, a wye connection will give you a voltage of, 13800/1.73 = 7977 volts to ground.
Does voltage flow in a circuit Explain?
Voltage in an electrical circuit is the rough equivalent of pressure in a water pipe. It causes the electricity to flow. Higher voltage; more flow. The difference is that you can think of pressure applied at a single point, but voltage is always the difference in electrical potential between two points. That's how a bird can stand on a 7,000-volt rural electrical line without harm. The potential difference (voltage) between the line and the ground is 7,000 volts, but the potential difference (voltage) between the bird's two feet is very tiny.
What is a line to line voltage?
In a 3 phase system, the voltage measured between any two phase is called line to line voltage.And the voltage measured between line to neutral is called phase to neutral (line to neutral) voltage.AnswerThere is no such thing as a 'phase-to-phase' or a 'phase-to-neutral' voltage. The correct terms are 'line-to-line' and 'line-to-neutral'.The voltage between any two line conductors is called a line voltage.In a three-phase, three-wire, system, the line voltage is numerically equal to the phase voltage.In a three-phase, four-wire, system, the voltage between any line conductor and the neutral conductor is called a phase voltage. The line voltage is 1.732 times larger than the phase voltage.
Does line to ground voltage always half the value of line to line voltage?
Line to Ground voltage = line to line voltage / 1.73AnswerIt depends what configuration is being measured. In the case of the secondary of a split-phase distribution transformer used to supply residences in North America, the answer is yes. In the case of a star (wye) connected secondary distribution transformer used to supply residences in Europe, no: the line to ground voltage will be as described in the first answer.
Is transmission voltage a phase to phase voltage or a phase to ground voltage?
Phase to Phase voltageCorrection to the above answer:There is no such thing as a 'phase-to-phase' or 'phase-to-ground' voltage. The correct terms are 'line-to-line' (or 'line voltage') and 'line-to-ground' (or 'phase voltage'). Transmission-line voltages are line-to-line (or 'line') voltages.
Should there be voltage between ground and each hot of a three phase power system?
There are two types of connections in three phase systems. One is a delta connection where there is no connection to ground, so you should not get any voltage to ground. This is classed as a three phase three wire system. In this type of system any one of the phase wires could become grounded and no one be the wiser. Code requires that grounding lights be added to a delta system to visually show what the phase condition is in relationship to ground. The other type of system is a wye or star point connection. This is classed as a three phase four wire system. In this type of connection the coil ends are all joined together and grounded. You would have voltage between the phases and a lower voltage to ground. The voltage to ground would be the phase voltage divided by 1.73.Yes. If there is no voltage between a hot and a ground, either the hot isn't really a hot or the ground isn't really a ground.AnswerThere is always a potential difference between a line conductor and ground, regardless of whether it is a three-wire system or a four-wire system. This is due to the capacitance between line and ground.
What is the voltage to ground of 13800 volts line to line?
On a three phase system with a line to line voltage of 13800, a wye connection will give you a voltage of, 13800/1.73 = 7977 volts to ground.
What is the line voltage between two lines?
the voltage between 1 line & phase =120v The voltage between 2 line =240
Does voltage flow in a circuit Explain?
Voltage in an electrical circuit is the rough equivalent of pressure in a water pipe. It causes the electricity to flow. Higher voltage; more flow. The difference is that you can think of pressure applied at a single point, but voltage is always the difference in electrical potential between two points. That's how a bird can stand on a 7,000-volt rural electrical line without harm. The potential difference (voltage) between the line and the ground is 7,000 volts, but the potential difference (voltage) between the bird's two feet is very tiny.
What is a line to line voltage?
In a 3 phase system, the voltage measured between any two phase is called line to line voltage.And the voltage measured between line to neutral is called phase to neutral (line to neutral) voltage.AnswerThere is no such thing as a 'phase-to-phase' or a 'phase-to-neutral' voltage. The correct terms are 'line-to-line' and 'line-to-neutral'.The voltage between any two line conductors is called a line voltage.In a three-phase, three-wire, system, the line voltage is numerically equal to the phase voltage.In a three-phase, four-wire, system, the voltage between any line conductor and the neutral conductor is called a phase voltage. The line voltage is 1.732 times larger than the phase voltage.
Does line to ground voltage always half the value of line to line voltage?
Line to Ground voltage = line to line voltage / 1.73AnswerIt depends what configuration is being measured. In the case of the secondary of a split-phase distribution transformer used to supply residences in North America, the answer is yes. In the case of a star (wye) connected secondary distribution transformer used to supply residences in Europe, no: the line to ground voltage will be as described in the first answer.
Why do you have voltage to ground but not voltage phase to phase?
There is phase to phase voltage in 3 phase system.AnswerYou don't get voltage 'phase-to-phase'; it's 'line-to-line'!
What is the difference between a motor starter and a contactor?
Motor started will have overloads the contactor connect es line voltage.
What is the volts per phase on a 480 3 phase system?
The (ideal) voltage is 480V line to line. The line to neutral voltage (if it is a grounded system - 4 wires) is 480 / 1.732 = 277 volts. The actual measured voltage may be slightly higher or lower than this.
How match 2 phase line voltage between them?
To match 2 phase line voltage it has to be the same voltage.
What voltage would be measured from any phase to ground on a 480 volt 3 phase wye system?
A voltage of 277 is the line to neutral (ground) voltage of a 480 volt wye three phase system. L1- N, L2 - N and L3 - N will give you 277 volts. L1 to L2. L2 to L3 and L3 to L1 will give you 480 volts.
