0
What else can I help you with?
Why electrolytic capacitors are used for frequency response of BJT as amplifier?
It can take a lot of capacitance to present a low impedance to a low frequency. Electrolytics offer lots of capacitance for a low price.
Why fet is preferred over the bjt?
Disadvantage:Easy to damage when compared to BJT
What is bjt and jfet?
BJT is Bipolar junction transistor FET is Field effect Transistor It is a current controlled device It is voltage controlled device
Bjt in sine wave oscillator?
it is an oscillator
Whether film capacitors can be replaced with ceramic or mica capacitor?
Film capacitors cannot be replaced with ceramic or mica capacitors if used for analog signal processing. However, mica capacitors can be replaced with ceramic capacitors in general.
Why electrolytic capacitors are used for frequency response of BJT as amplifier?
It can take a lot of capacitance to present a low impedance to a low frequency. Electrolytics offer lots of capacitance for a low price.
Why to short circuit capacitor in small signal analysis of BJT?
if the input signal passes through the biasing resistors, the biasing conditions get altered . To prevent this, the input signal should be directly sent to the amplifier (BJT) .Since a capacitor acts as a short circuit for ac signals,capacitors are placed both in the input side and the output side.
Why fet is preferred over the bjt?
Disadvantage:Easy to damage when compared to BJT
What are the example current controlled device?
Bipolar junction transistor(BJT)
Is it possible idenfiying bjt and fet on the circuit?
Identifying BJTs and FETs on the circuitIt is in fact possible to identify transistors in circuits. However, this depends on one's familiarity with the different types of BJT and FET constructions. Since the transistor is a three-terminal device, it is easy to differentiate it from other circuit elements such as resistors, capacitors and inductorswhich are all two-terminal devices. The only exceptions to this may include regulators; which though are not transistors are provided with three terminals.
Why do you use a bladder for?
to get rid of the waste in our body that is ot neded to help the body finction
How many terminals does BJT have?
Three.
What is btj transistors?
They are NPN and PNP. BJT mean bipolar junction transistors. there are two P-N junctions in BJT transisters.
Are capacitors polarity sensitive?
The capacitors those are polarity sensitive are called electrolytic and tantalum capacitors. These capacitors are labeled as positive and negative.
What is the difference between a standard capacitor and a coupling capacitor?
Coupling capacitors are used to couple different stages so as to prevent DC from the o/p of one stage to go into the i/p of the next stage. For instance in coupling two BJT (bipolar junction transistors) it is required to use coupling capacitor to allow only ac signal from the o/p of fisrt stage to go to i/p of next BJT as incoming dc can distrub the biasing of the other BJT. Bypass capacitors are used to bypass the ac signal to ground. A capacitor is connected b/w the gnd and the wire. For ac signal capacitor will behave as short and will bypass it. However dc will not be bypassed as capacitor will behave as open for DC.
Why FET produces less noise than BJT?
because the fet is made out of carbon metal oxide and the bjt is made out of silicon or germanium
What is bjt and jfet?
BJT is Bipolar junction transistor FET is Field effect Transistor It is a current controlled device It is voltage controlled device
