0
What else can I help you with?
Led circuit for 120 volts?
There can be no answer for this without knowing how strong a resistor is involved. (Ohms)
How do you connect an LED into a circuit?
A: Add the proper resistor in series with the LED. What resistor? Simple 10volts source minus the LED source divided by the 20ma current that should be flowing gives you the resistor 10-1.8=8.2/.02=900 ohms. The 1.8 can be anything it is up to the LED voltage drop. LONG LEAD IS POSITIVE SHORT IS NEGATIVE SINCE IT IS A DIODE
What is the function of a variable resister in an electrical circuit?
A variable resistor usually has three terminals, one of which is connected to the 'wiper' by which means its resistance is measured. By using all three terminals, we can control the potential difference in a circuit. When used in this way, we call the variable resistor a 'potentiometer'. By using two of the three terminals, one of which must be connected to the variable wiper, we can control the current passing through circuit. When used in this way, we call the variable resistor a 'rheostat'.
A can be used to reduce the current in a circuit?
A resistor.
How LED flashing circuit board function?
It may work in several different ways, depending on the actual circuit used. As asked no better answer can be given than the circuit board alternately turns the current in the LED on and off.
Function of resistor capacitor and transistor on integrated circuit?
resistor
What is a function of a resistor in a fire alarm circuit?
A resistor in a sensor circuit is used as a simple way to monitor the function of the circuit. The resistor has a calibrated and known voltage drop and current while the circuit is "normal". If there is a short-circuit, or an open-circuit, the voltage and current will change and trigger the trouble alarm.
What is the function of resistor in electric circuit?
the function of a resister is to lower the voltage.
What are fractors?
A fractor is a circuit component that has both the function of resistor and capacitor.
Where do you use the current limiting resistor?
in a flashing led circuit connected in series
How resistor function in producing passiveness in closed circuit?
We know definition of Resistance, that resistor always opposes to flow of current. resistor should have input signals from source , so it generates passivity in circuit
The fractors of 40?
A fractor is a circuit component that has both the function of resistor and capacitor.
Led circuit for 120 volts?
There can be no answer for this without knowing how strong a resistor is involved. (Ohms)
How to build an led cIRCUIT?
Connect an LED, two AA batteries, and a resistor of around 100-150 ohms, all in series.If the LED doesn't light, then turn either the LED or the batteries around in the circuit.
Should a resistor go on the positive or negative side of an LED?
It does not matter. Kirchoff's Current Law states that the signed sum of the currents entering a node is zero. A consequence of that law is that the current in every part of a series circuit is the same. The only thing that resistor location affects is the potential voltage of the LED terminals with respect to the rest of the circuit. Certainly, if you are driving the LED with high voltage, such as 120VAC, you should consider the resistor location so as to reduce electrocution hazard but, the LED's performance is not affected by resistor location in the circuit.
What does a resistor do in an ampliflyer circuit?
what does a resistor in an ampliflyer circuit
What the role of a resistor in an led circuit?
a resister is to RESIST current flow....if the LED gets the full effect of the power supply, the LED will immediately blow out.
