In the 8051 microcontroller, the maximum address in the stack is typically 0x07FF, which is the highest addressable location in the internal RAM. However, since the stack grows downwards from the top of the internal RAM, the stack pointer (SP) typically starts at 0x07 and can go down to 0x00. Thus, the effective stack limit is determined by the available internal RAM and the starting point of the stack pointer, which can be set to a maximum of 0x07 in the standard configuration.
07H
it is a microcontoller ( a version of 8051) At denotes ATMEL company C stands for CMOS 9 stands for flash memory
2.4ma
65536 bytes, because the 8051 family has a 16 bit external address buss.
Intel
8 bit
pc and stack pointer
07H
it is a microcontoller ( a version of 8051) At denotes ATMEL company C stands for CMOS 9 stands for flash memory
2.4ma
65536 bytes, because the 8051 family has a 16 bit external address buss.
12
The 8051 microcontroller has a maximum data memory capacity of 64 KB, which includes both internal and external RAM. Internally, it has 128 bytes of RAM and can be expanded to utilize external memory through its address bus. The architecture allows for addressing external RAM, but the practical limit often depends on the specific implementation and additional circuit design.
Intel
how many interrupts in 8051
because i said so thats why
In the 8051 microcontroller architecture, the stack pointer (SP) is 8 bits long because it directly addresses a limited range of memory locations within the internal RAM, specifically up to 256 bytes. In contrast, the program counter (PC) and data pointer (DPTR) are 16 bits long to accommodate larger address spaces; the PC can address up to 64KB of program memory, while the DPTR can address up to 64KB of external data memory. This distinction allows for efficient use of resources while maintaining compatibility with the architecture's requirements.