define the maximum value of an ac wave form
10 Volts. ANSWER: ASSUMING a start when the voltage is at 0 and 0 degrees at 90 degrees is at maximum at 180 degrees is again at 0 v at 270 degrees is at the maximum negative potential and at 360 degrees is again at 0 v. the voltage is irrelevant in any case but it will follow these rules
rms voltage will give the ability to predict how much work will be done by an ac voltage. the rms value of a pure sine wave is 0.707 times it's maximum amplitude.
maximum generated voltage is 21KV
It is smoothing
define the maximum value of an ac wave form
A half wave rectifier does not make a stable voltage. A single phase half wave creates a "bumpy road" where voltage modulates between sine wave maximum and zero. A three phase half wave will create a more stable, but ultimately "unclean", voltage.
Assuming sine wave (it is different if not): Vp-p = 2.828 * Vrms
the answer is 5.6vp-p
We often see the peak and trough (maximum positive and maximum negative excursions) of the sine wave considered as points of momentarily constant voltage. Those points are at phase angles of 90 degrees and at 270 degrees.
At the points described the membrane potential (or "voltage") is the resting membrane potential which is around -90mV not 0.
10 Volts. ANSWER: ASSUMING a start when the voltage is at 0 and 0 degrees at 90 degrees is at maximum at 180 degrees is again at 0 v at 270 degrees is at the maximum negative potential and at 360 degrees is again at 0 v. the voltage is irrelevant in any case but it will follow these rules
rms voltage will give the ability to predict how much work will be done by an ac voltage. the rms value of a pure sine wave is 0.707 times it's maximum amplitude.
maximum generated voltage is 21KV
The QRS complex is normally larger than the P Wave because depolarization of the larger muscle mass of the ventricles generates more voltage than does depolarization of the smaller muscle mass of the atria
VSWR = voltage standing wave ratio = ratio of the maximum voltage to minimum on a line = VSWR = Emax / Emin = Imax / Imin Reflection Coefficient is the ratio of reflected voltage to incident voltage. = ZL - ZO / ZL + ZO
the voltage standing wave ratio is defined (1+p)/(1-p), where p is the the reflection coefficient magnitude. p = 1 for an open circuit, therefore the VSWR will approach infinite.