0
What else can I help you with?
What is the relationship between voltage power and current?
The unit of power is watts, the unit of current is amps, and the unit of voltage it volts. Power = Voltage X Current Voltage = Power / Current Current = Power / Voltage In electricity, power is symbolized with a P, current with an I, and voltage with a V. The real formula looks like: P = V x I V = P / I I = P / V
What is the three ammeter method?
I am assuming that you really want to use ammeters to measure power in a balanced 3 phase system. (hope you are not meaning 3 watt meter method) Power in Watt in a three phase system is equal to 1.73 x line voltage x line current x power factor. You need to know line voltage, power factor also in addition to current to compute the power. If the system is balanced then actually you do not need to connect ammeters in all three lines. One ammeter reading will do.
What is a volt-ampere the product of?
A volt - ampere is the unit for the product of voltage and current. This is power. Power = voltage x current. The unit of power is more usually called the watt. Volts x amps = watts.
How do you compute powe available on a 3 phase circuit?
Root 3 x voltage x current x power factor = power in watt
Does amps times voltage equal watthours?
Amps times volts = watts Watts measures the rate of power usage. watts times hours = watt hours Watt hours is a measure of the amount of power used.
Do a 12 volt 50 watt bulb and a 230 volt 50 watt bulb draw the same current?
No, they do not draw the same current. The current drawn by an electrical device is determined by the power (Watts) and voltage (Volts) using the formula: Current (amps) = Power (Watts) / Voltage (Volts). So, the 12 volt 50 watt bulb will draw higher current compared to the 230 volt 50 watt bulb.
Can a laptop with a 65 watt power adapter be powered up with a 300 watt dc to ac inverter with 140 watt continuous operation with low voltage and overload protection?
Yes, theoretically you can power up a laptop with a 65 watt power adapter using a 300 watt DC to AC inverter, as the laptop will only draw the power it needs (65 watts). However, it's important to ensure that the inverter has low voltage and overload protection to prevent any damage to the laptop or the inverter itself during operation.
How many watt DC to AC converter do you need to run a 6 amp power tool?
The formula for watts (or power) is Amps times voltage. Therefore with a 6 amp draw times 120 volts would be about 720 watts. A 1000 watt power inverter would do the job.
How many amperes does a 20 watt compact fluorescent lamp draw?
To answer this question the voltage has to be given. I = W/E. Amps = Watts/Voltage.
Draw the triangle form equation for Watt's Law?
Watt's Law is an incorrect term often used to 'rename' the power equation P=VI.The correct term is power law. The real Watt's law is an incorrect hypothesis dealing with the latent heat of steam, so it's not really a 'law' either.In other words anyone using the term Watt's Law in relation to electricity is wrong.
Is it better to run a 220 watt or a 110 watt?
It ultimately depends on your specific needs and equipment. A 220 watt system may provide more power and capacity, but it may also be more expensive and require a higher voltage input. A 110 watt system may be more cost-effective and easier to integrate into existing setups.
How many milliamps does a 100 watt bulb use?
A 100 watt bulb typically draws around 833 milliamps (mA) of current. This calculation is done using Ohm's Law formula: Current (I) = Power (P) / Voltage (V). With a standard 120V power source, a 100W bulb would draw approximately 833mA.
What are the formulas for Ohm's Law and Watt's Law?
Ohm's Law: V = I * R (Voltage = Current * Resistance) Watt's Law: P = V * I (Power = Voltage * Current)
What is the volt of a zero watt bulb?
A zero watt bulb does not consume any power, so it does not have a voltage rating. Voltage is a measure of electrical potential difference, typically associated with the amount of energy transferred per unit charge. In the case of a zero watt bulb, there is no power being consumed, so there is no voltage required to power it.
Can you run a 100 watt bulb with low voltage cables?
The cable voltage is set by the voltage of the supply and not by what is connected to it. But a 100 watt amplifier on a 120 v supply would draw less than 1 amp even at high volume.
What is the relationship between voltage power and current?
The unit of power is watts, the unit of current is amps, and the unit of voltage it volts. Power = Voltage X Current Voltage = Power / Current Current = Power / Voltage In electricity, power is symbolized with a P, current with an I, and voltage with a V. The real formula looks like: P = V x I V = P / I I = P / V
What is the three ammeter method?
I am assuming that you really want to use ammeters to measure power in a balanced 3 phase system. (hope you are not meaning 3 watt meter method) Power in Watt in a three phase system is equal to 1.73 x line voltage x line current x power factor. You need to know line voltage, power factor also in addition to current to compute the power. If the system is balanced then actually you do not need to connect ammeters in all three lines. One ammeter reading will do.
