A rack and pinion, cam, crank, and screw can do that.
A waterwheel converts water power into rotary motion for running machinery, etc..
Reciprocating motion is the up and down motion.. This motion is converted into ratational motion by the crankshaft.. This because it (crankshaft) is frequently combined with flywheel thus to keep the discontinous reciprocating energy as rotation energy.. Added points. Crankshaft drive is the entire mechanism that converts the engine's piston up and down motion where as in cylinder a piston is moved as aresult of applied fluid pressure, the actuator provide rotary motion (Lawrence dinala- Law Dinh)
single slider crank is a simple actuator which consists of four links and which converts rotary motion into reciprocating and vice versa.
That refers to something that moves around in a circle.
It is the reciprocating motion of the pistons that is changed into rotary motion by the cam axle.
spiniards
Bevel gears can transmit motion/power at right angles.
Cam and follower mechanism: Converts rotary motion into linear motion by translating the motion of a cam into the linear motion of a follower. Rack and pinion system: Uses a rotating gear (pinion) to move a linear rack back and forth, converting the rotary motion into linear motion. Scotch yoke mechanism: Utilizes a circular motion to drive a sliding block in a straight line, converting rotary motion to linear motion. Lead screw mechanism: A rotating screw that moves a nut along its threads, translating rotational motion into linear motion.
converts rotary motion to straight motion.
The crankshaft and connecting rod (or piston rod).
Crank and slider
The engine's crankshaft converts the up-and-down motion of the pistons into rotary motion. This rotary motion is then transmitted to the transmission and wheels to propel the vehicle forward.
Scotch Yoke Mechanism is a mechanism in which the rotary motion is converted to reciprocating motion, with a single link or bar. The reciprocating system has to be constrained along the guide ways for linear motion.
Two types of system I can think of:A cam mounted on a rotating shaft can push against a rod. If the rod is held against the cam by a spring then the system is capable of reciprocating action.A crank: The crank attached to the pedals on a bicycle is an example, although it converts reciprocating motion to rotary motion.
connecting rod is provided between crank and the piston,which converts the reciprocating motion of the piston into rotary motion of the crank.
A waterwheel converts water power into rotary motion for running machinery, etc..
A rotary actuator is the type of device that forces a valve to rotate. It converts energy—typically pneumatic, hydraulic, or electric—into rotary motion, enabling the valve to open or close. This mechanism ensures precise control over the flow of fluids within various systems.