0
What else can I help you with?
How a combinational clipper works?
A combinational clipper is a type of electronic circuit used to limit or "clip" the amplitude of an input signal. It typically consists of diodes and resistors arranged in a specific configuration. Here's a basic explanation of how a combinational clipper works: **Input Signal**: The input signal is the waveform that you want to clip. It could be a sine wave, square wave, or any other waveform. **Diodes**: The key components in a clipper circuit are diodes. Diodes allow current to flow in only one direction. In a combinational clipper, diodes are arranged in such a way that they conduct when the input signal exceeds a certain voltage level (called the clipping level). **Clipping Level**: The clipping level is the voltage level at which the diodes start conducting. It determines the maximum (positive or negative) amplitude of the output signal. **Resistors**: Resistors are used to limit the current flow through the diodes and to set the clipping level. They are connected in series with the diodes and the input signal. **Output Signal**: The output signal is obtained across the diodes. When the input signal exceeds the clipping level, the diodes start conducting, effectively "clipping" the signal. This means that any portion of the input signal above (or below, depending on the configuration) the clipping level is removed, resulting in a clipped output waveform. **Configuration**: The configuration of the diodes and resistors determines the clipping characteristics of the circuit. For example, in a simple clipper circuit, one diode may be connected in series with the input signal in a forward bias configuration, causing it to clip the positive portion of the waveform. Similarly, another diode may be connected in series in a reverse bias configuration to clip the negative portion of the waveform. Overall, a combinational clipper works by selectively conducting current through diodes to limit the amplitude of the input signal, resulting in a clipped output waveform.
What does an amplifier do to a small input signal?
amplifier will strengthen da small input signal n amplifies it
What happens when high input signal is given to pnp transistor?
A high signal input to a transistor amplifier gives a high signal output provided it stays linear.
Why terminals of opamp are called as inverting and noninverting?
In an op-amp, an input on the inverting terminal drives the output in the opposite direction, while an input on the non inverting terminal drives the output in the same direction. In a normal closed loop negative feedback configuration, there is feedback from output to inverting input, so that the output becomes a known function of input. So long as you stay within limits, the output will go to whatever value is required to make the inputs be the same.
What is 3 rd pin of op amp?
I should expect a real-world op-amp to have 5connections:-- the inverting signal input-- the non-inverting signal input-- the signal output-- the power supply input-- the ground connection.
How a combinational clipper works?
A combinational clipper is a type of electronic circuit used to limit or "clip" the amplitude of an input signal. It typically consists of diodes and resistors arranged in a specific configuration. Here's a basic explanation of how a combinational clipper works: **Input Signal**: The input signal is the waveform that you want to clip. It could be a sine wave, square wave, or any other waveform. **Diodes**: The key components in a clipper circuit are diodes. Diodes allow current to flow in only one direction. In a combinational clipper, diodes are arranged in such a way that they conduct when the input signal exceeds a certain voltage level (called the clipping level). **Clipping Level**: The clipping level is the voltage level at which the diodes start conducting. It determines the maximum (positive or negative) amplitude of the output signal. **Resistors**: Resistors are used to limit the current flow through the diodes and to set the clipping level. They are connected in series with the diodes and the input signal. **Output Signal**: The output signal is obtained across the diodes. When the input signal exceeds the clipping level, the diodes start conducting, effectively "clipping" the signal. This means that any portion of the input signal above (or below, depending on the configuration) the clipping level is removed, resulting in a clipped output waveform. **Configuration**: The configuration of the diodes and resistors determines the clipping characteristics of the circuit. For example, in a simple clipper circuit, one diode may be connected in series with the input signal in a forward bias configuration, causing it to clip the positive portion of the waveform. Similarly, another diode may be connected in series in a reverse bias configuration to clip the negative portion of the waveform. Overall, a combinational clipper works by selectively conducting current through diodes to limit the amplitude of the input signal, resulting in a clipped output waveform.
Why there is no phase inversion of the input signal at the output signal of the circuit?
Input to output shorted, check active devices, transistors,fet,tubes ect....
What is the ideal dc value of output signal when there is no input signal in class b amplifier?
A: If the input is zero the desire output is zero no matter what class it is.
What does an amplifier do to a small input signal?
amplifier will strengthen da small input signal n amplifies it
Are amplifiers input or output devices?
An amplifier is both an input and output device. An amplifier, as its name suggests, amplifies a signal, meaning that it makes it stronger. An amplifier takes something as input, like maybe a sound signal, and its output is a more powerful (or louder) version of the same signal.
What is the ratio of the output signal to the input signal of an amplifier that is usually measured in decibels?
Answer is GAIN
A mealy state machine output depends on?
A mealy state machine output depends on both the current state and the input signal received. The combination of the current state and the input signal dictates what the output of the machine will be for a given transition.
What is an input or output of a continuosly variable signal within a designated range?
The input or output of a continuously variable signal within a designated range is a sampled data or a feedback system. This accepts limited analog signal and encodes.
What is differential feedback?
Differential feedback is a technique used in electronic circuits to reduce distortion and improve linearity. It involves comparing the output signal with a portion of the input signal and feeding the difference back to the input. This helps to cancel out unwanted signals and improve the overall performance of the circuit.
Is a games controller input or output?
Input, as you are inputting information into the games console, so that you can play.
What is considered as the output and input terminal of the CB configaration?
In a Common Base (CB) configuration, the input terminal is the emitter, where the input signal is applied, and the output terminal is the collector, where the output signal is taken. The base terminal is common to both the input and output circuits, hence the name "common base." This configuration is known for providing high-frequency response and low input impedance.
What happens when high input signal is given to pnp transistor?
A high signal input to a transistor amplifier gives a high signal output provided it stays linear.
