0
To determine the appropriate pipe size for a flow rate of 50 gallons per minute (GPM), factors such as the pipe material, the length of the pipe, and the allowed pressure drop must be considered. Generally, for a flow rate of 50 GPM, a 2-inch diameter pipe is often recommended for water distribution systems to minimize friction loss and ensure adequate flow. However, it's essential to consult hydraulic charts or a Plumbing engineer for precise sizing based on specific application requirements and conditions.
What else can I help you with?
How do you convert psi water pressure to gallons per minute?
First you need the size of the pipe and the volume of water supply. Pressure will vary during usage. Standard well system operates between 20-40 psi and city systems operate from 50-70 psi.
What is the GPM for an open ended 2 inch pipe at 60 PSI?
The Gallons Per Minute (GPM) flow rate for an open-ended 2-inch pipe at 60 PSI can be estimated using the Hazen-Williams equation or similar hydraulic formulas. Generally, a 2-inch pipe can deliver approximately 40-50 GPM at this pressure, depending on the specific conditions such as pipe material and length. For more precise calculations, factors like pipe roughness and fittings should also be considered.
How many gpm of water flow through a 2 inch pipe at 100 psi?
The flow rate of water through a 2-inch pipe at 100 psi can be estimated using hydraulic calculations. Generally, a 2-inch pipe can flow around 40-50 gallons per minute (GPM) at that pressure, depending on factors like pipe length, fittings, and friction loss. For precise calculations, it's best to use the Hazen-Williams equation or consult flow tables specific to the pipe material and conditions.
How much water can flow through a 4 inch pipe at 50 psi?
The flow rate of water through a 4-inch pipe at 50 psi can be estimated using the Hazen-Williams equation or similar hydraulic formulas. Generally, a 4-inch pipe can carry approximately 1,000 to 2,000 gallons per minute (GPM) under these conditions, depending on factors like the pipe's material, roughness, and the length of the pipe. For more precise calculations, specific hydraulic modeling or empirical data should be consulted.
How much water GPM will flow through 90 feet of 1.5 pipe at 70 psi with 9 elbows?
To estimate the flow rate in gallons per minute (GPM) through a 90-foot length of 1.5-inch pipe at 70 psi with 9 elbows, you would typically use the Hazen-Williams equation or similar hydraulic calculations. Generally, for a 1.5-inch pipe, the flow rate can vary, but it could range from approximately 30 to 50 GPM under those conditions, depending on the specific losses introduced by the elbows and other factors. For precise calculations, a hydraulic analysis considering all variables would be necessary.
How do you convert psi water pressure to gallons per minute?
First you need the size of the pipe and the volume of water supply. Pressure will vary during usage. Standard well system operates between 20-40 psi and city systems operate from 50-70 psi.
How many GPM through 1.5 inch pipe at 50 psi?
you need to know the viscosity of the liquid - molasses or alcohol?
What is the GPM for an open ended 2 inch pipe at 60 PSI?
The Gallons Per Minute (GPM) flow rate for an open-ended 2-inch pipe at 60 PSI can be estimated using the Hazen-Williams equation or similar hydraulic formulas. Generally, a 2-inch pipe can deliver approximately 40-50 GPM at this pressure, depending on the specific conditions such as pipe material and length. For more precise calculations, factors like pipe roughness and fittings should also be considered.
My well is making 50 gallons of water per minute How do I convert 50 gpm to PSI?
gpm and psi are two different measures that are not directly related, though a change in one will affect the other. To get the pressure at a certain point in your piping, you would need to measure it. Or, if you know that your pump is rated for 50 gpm at 80psi (1 foot water column = 2.31 psi) and your pump is lifting a column of water 15' (34.65 psi), then you should have about 45 psi residual. If you have long runs of horizontal pipe you may need to add some for pipe friction also.
How many gpm of water flow through a 2 inch pipe at 100 psi?
The flow rate of water through a 2-inch pipe at 100 psi can be estimated using hydraulic calculations. Generally, a 2-inch pipe can flow around 40-50 gallons per minute (GPM) at that pressure, depending on factors like pipe length, fittings, and friction loss. For precise calculations, it's best to use the Hazen-Williams equation or consult flow tables specific to the pipe material and conditions.
How much hp.is needed to move water thrugh 2 inch line 1500 ft. at 50 psi.?
To calculate the horsepower (hp) needed to move water through a 2-inch line over 1500 feet at 50 psi, you can use the formula: [ \text{hp} = \frac{(Q \times \text{Pressure})}{3960 \times \text{Efficiency}} ] Where Q is the flow rate in gallons per minute (GPM). For a 2-inch pipe at 50 psi, you'd typically have a flow rate of around 200 GPM. Considering pump efficiency is around 70%, the calculation yields approximately 5.5 hp. However, the specific hp required can vary based on factors like friction loss in the pipe and the actual flow rate.
DN 50 valve size?
DN 50 means: "DN": Diametre nominel - Nominal diameter of the valve, and "50" is the size of the valve in [mm]. Alternative is NPS (Nominal pipe size in inches).
What does it mean for size DN 50?
DN": Diametre nominel - Nominal diameter of the valve, and "50" is the size of the valve in [mm]. Alternative is NPS (Nominal pipe size in inches).
What size Full Port Ball Valve do I need for 18 gallons of water at 50 psi?
Depends what size your pipe is
How much water can flow through a 4 inch pipe at 50 psi?
The flow rate of water through a 4-inch pipe at 50 psi can be estimated using the Hazen-Williams equation or similar hydraulic formulas. Generally, a 4-inch pipe can carry approximately 1,000 to 2,000 gallons per minute (GPM) under these conditions, depending on factors like the pipe's material, roughness, and the length of the pipe. For more precise calculations, specific hydraulic modeling or empirical data should be consulted.
What is the appropriate size of a breaker needed for a 240-volt circuit that requires a 50 amp breaker?
For a 240-volt circuit that requires a 50 amp breaker, the appropriate size of the breaker needed is 50 amps.
How much water GPM will flow through 90 feet of 1.5 pipe at 70 psi with 9 elbows?
To estimate the flow rate in gallons per minute (GPM) through a 90-foot length of 1.5-inch pipe at 70 psi with 9 elbows, you would typically use the Hazen-Williams equation or similar hydraulic calculations. Generally, for a 1.5-inch pipe, the flow rate can vary, but it could range from approximately 30 to 50 GPM under those conditions, depending on the specific losses introduced by the elbows and other factors. For precise calculations, a hydraulic analysis considering all variables would be necessary.
