0
What else can I help you with?
Why is it thatFET is called a voltage operated device?
since in an FET the value of the current depends upon the value of the voltage applied at the gate and drain...so it is known as voltage controlled device.. for example..in a mosfet..the current from drain to source depends upon the width of the depletion layer..which in turn depends upon the voltage applied on the gate.. so that is the reason
How do you work thyristor?
The thyristor functions in such a way that when the anode voltage is greater than the cathode voltage , it is not triggered but only triggers when a gate signal is applied at the gate of the device.
What is mean't by Reverse voltage?
Reverse voltage is voltage is applied in reverse. Instead of the positive voltage going into the anode lead of a component, it goes into the cathode lead of the component.
Difference between Threshold voltage and knee voltage?
the voltage at which electronic device operates is callled threshold voltageand the voltage at which device show cinduction in forward biased stste
What is a torque transducer?
A transducer is an electronic device that measures something -- voltage, temperature or in this case torque. Torque is the force applied to twist something, like the twisting one does to tighten a screw, bolt or jar lid. So, a torque transducer is an electronic device that measures the amount of torque being applied to something.
Can you use a 12v power adapter when device requires 6v?
No, twice the voltage applied to a device that only requires 6 volts will probably destroy the device. When a manufacturer of equipment states a required voltage for a device that is the voltage that must be used.
Is low voltage harmful to electronics?
No the low voltage is not harmful for all ever . if you applied low voltage than the output power of your device will low and you can also observe that the performance of your device will also reduce. it may also make the device inactive.
What is meant by rated voltage?
the voltage which is mainly applied to primary side of the transformer is called rated voltage.Answer'Rated voltage' is the nominal voltage at which an electrical device has been designed to operate.
What is peak detector?
a device which output voltage is almost the real peak valueof an applied signal
What will happen if you use phase to phase voltage for a single phase device?
If a single-phase device is connected to a phase-to-phase voltage, the device may get damaged due to the higher voltage applied. Single-phase devices are designed to operate at a lower voltage compared to phase-to-phase voltage levels typically found in three-phase systems. It is important to match the voltage ratings of the device with the supply voltage to prevent damage.
What device uses the voltage in an electrical current?
A voltage, or potential difference, is what causes current to flow through a circuit. So all devices (called 'loads') require a voltage applied to them.
Why is it thatFET is called a voltage operated device?
since in an FET the value of the current depends upon the value of the voltage applied at the gate and drain...so it is known as voltage controlled device.. for example..in a mosfet..the current from drain to source depends upon the width of the depletion layer..which in turn depends upon the voltage applied on the gate.. so that is the reason
How do you work thyristor?
The thyristor functions in such a way that when the anode voltage is greater than the cathode voltage , it is not triggered but only triggers when a gate signal is applied at the gate of the device.
How transistors are classified on the basis of power?
There are two primary types of transistors classified on the basis of power: bipolar junction transistors (BJT) and field effect transistors (FET). Bipolar junction transistors are current-controlled devices, meaning that the amount of current flowing through the device is controlled by the voltage applied to the base electrode. The base-emitter voltage (VBE) and base-collector voltage (VBC) determine the amount of current flowing through the device. The current flowing through the device is given by the following equation: I = β * (VBE - VBC) Where β is the current gain of the transistor. Field effect transistors are voltage-controlled devices, meaning that the voltage applied to the gate electrode controls the amount of current flowing through the device. The voltage applied to the gate electrode determines the width of the conducting channel between the source and drain electrodes. The current flowing through the device is given by the following equation: I = μ * W * (VGS - VDS) Where μ is the mobility of the carriers in the channel, W is the width of the conducting channel, VGS is the voltage applied to the gate electrode, and VDS is the voltage applied to the drain electrode.
Is line voltage understood as any voltage?
Line voltage is understood as the voltage that the device or appliance needs to operate on. It is also referred to as the devices working voltage. Once the proper line voltage or working voltage is applied to the device it may be transformed to different voltages for different internal component circuits.
How to find resistance?
-- Apply a small, known voltage between the terminals of the device. -- Measure the current through the device with the voltage applied. -- Calculate the resistance of the device. It's (voltage) divided by (current).
Other name of voltage to current converter?
a FET, or Feild Effect Transistor. In a FET, the value of the current depends upon the value of the voltage applied at the gate and drain so it is known as a voltage controlled device. For example: In a MOSFET the current from drain to source depends upon the width of the depletion layer which in turn depends upon the voltage applied on the gate.
