0
What else can I help you with?
What is the wire connected to the input terminal of the power supply or signal generator or oscilloscope in English which I remembered it begins with s not the test pens?
scope probes
In a dry cell the carbon rod releases electrons and becomes the positive or negative terminal?
In a dry cell, the carbon rod is the positive terminal, or anode.
What is meant by anode and cathode?
Anode is positive electrode which attracts the negative anions while cathode is the negative electrode which attracts the positive cations during electrolysis.
What is negative grounding?
The term, 'negative ground' or 'negative earth' refers to the system of chassis-grounding, or chassis-earthing, used in vehicles. With this system, the negative terminal of the battery is directly connected to the metal parts of a vehicle, while the positive terminal is connected to the various electrical devices (lamps, etc.) using insulated conductors. The vehicle's metal parts ('chassis') then act as the return conductor to the battery.
What terminal does electrons flow from in a dry cell?
That is a good way to run the cell down quickly. Electrons are negatively charged so they always move from the positive terminal towards the negative. Each electron carries a charge of 1.602 x 10-19 coulombs so 1 coulomb (1 amp for 1 second) carries 6.24 x 1018 electrons.
When an ammeter is connected in a circuit which terminal of the battery must be connected to the positive terminal of the ammeter?
The positive terminal of the battery would be connected to the positive terminal of the ammeter. The load would then be connected between the two negative terminals, positive side of the load being connected to the negative side of the ammeter.
Why do you not get battery symbol on your laptop sometimes after you on power supply in your laptop made by Toshiba model no A200?
Note: When interconnecting A200 batteries (cells), they must be identical in voltage and amp rating! Batteries may be connected in series. The positive terminal of the first battery is connected to the negative terminal of the second battery; the positive terminal of the second is connected to the negative of the third, and so on. The voltage of the assembled battery is the sum of the individual batteries. The batteries are connected: + to - to + to - to + to -, etc. The capacity of the battery is unchanged. Batteries may also be connected in parallel. The positive terminal of the first battery is connected to the positive terminal of the second battery, the positive terminal of the second is connected to the positive of the third; the negative terminal of the first battery is connected to the negative terminal of the second battery, the negative terminal of the second is connected to the negative of the third and so on. The batteries are connected: + to + to + and - to - to -. In this configuration, the capacity is the sum of the individual batteries and voltage is unchanged.
When measuring voltage how should test probes be connected?
First connect the positive terminal of the voltage line to positive terminal of multimeter and negative to negative terminal of multimeter. Select voltage in multimeter and measure the voltage
What are positive ground cars?
Cars in which the positive terminal of the battery is connected to the chassis. They require specially designed components built for positive ground cars. The usual configuration is a negative ground (the negative battery terminal connected to the car's chassis).
What is carbon rod connected to the negative terminal of the battery?
The negative terminal of a carbon/zinc cell is connected to the zinc cup that functions as the cathode. The carbon rod is the anode (positive).
What is the meaning of straight and reverse polarity?
Straight polarity refers to the welding setup in which the electrode is connected to the positive terminal and the workpiece is connected to the negative terminal. Reverse polarity is the opposite setup, with the electrode connected to the negative terminal and the workpiece connected to the positive terminal. These polarity settings affect penetration, heat distribution, and weld quality in different ways.
Is the positive terminal of an ammeter connected to the positive terminal of the energy source?
No. An ammeter is to be connected in series, between the device and the battery's positive output, Its NEGATIVE terminal (red lead) has to be connected to the POSITIVE of the battery. Its positive terminal (black lead) will then be connected to the device's positive terminal. (Connecting an ammeter in series with a power supply by itself may damage or destroy the meter.)Almost every single digital ammeter made will indicate reverse current, so the worst you might get is a displayed reading of a negative amperage if you connected it in reverse.(For an illustration, see the related link)
What does the positive side of the battery do?
When connected to the cable which normally runs to the starter it completes the circuit. Electrons flow from the negative terminal to the positive terminal.
From which terminal of a battery are electrons pushed?
electrons come from the negative terminal, then goes around the complete circuit (clockwise) and comes back to the positive terminal. hope that helps!
What is the source of diode in reverse biased condition?
The anod terminal of diode is connected with negative and cathod is connected to positive
Connect a 12v wire to an amplifier?
Ensure the amplifier is turned off. Connect the positive (+) terminal of the 12V wire to the amplifier's positive terminal and the negative (-) terminal of the 12V wire to the amplifier's negative terminal. Once connected securely, you can then power on the amplifier.
Can you charge a 12 volt battery with a 24 volt charger?
I can if I charge 2 of them at a time. Most 24 volt chargers also have a 12 volt setting. What is hard to find is a 32 volt charger. We can charge a 12V battery with 24V charger, by connecting two 12V batteries in series i. e. the negative terminal of the first battery is connected to the positive terminal of the second, now the charger positive terminal is connected to the first battery positive terminal and the negative terminal of the charger is connected to the negative terminal of the second battery.
