Lead is not used by most modern plumbers.
The wall where the plumbing enters into the shower. Also known as a wet wall because it has water pipes in it. It is recommended that the head wall have access on the wall opposite the bathroom to be able for plumbers to remove or replace control valves, drains etc.
Yes. As long as there has been piped water there has been plumbers.
You can use 3m's caulk remover and a sharp razor blade.
The plural of plumber is plumbers. For example: She had to call out three different plumbers before the problem was fixed.
plumbers
No. Use the putty.
It will not dry out and if the drain needs to be removed at some point, it can be. Glue would make it difficult to work on. Modern 100% silicone caulk will also work, and can be removed easily, like plumber's putty.
I do not know any specific plumbers, but plumbers at Rescue Rooters are pretty cheap. They work quickly and efficiently and they get the job done on time so you don't have to worry about anything concerning sinks and drains.
Electric eels are cutting devices used by plumbers to clean blocked drains.
Plumbers putty is a soft, pliable substance used to create watertight seals around plumbing fixtures. It is commonly used to seal joints and connections in sinks, drains, and faucets. Plumbers putty helps prevent leaks and provides a secure seal that can easily be removed if needed.
trenchless sewer repairfree estimatesaffordable plumbing repairs and replacementshome service drains + pipes maintenancegas water heater servicequick garbage disposal repairtoilet repairsemergency plumbers
Yes, you can caulk over old caulk to seal gaps effectively, but it is important to ensure that the old caulk is clean and in good condition before applying new caulk.
Yes, you can put new caulk over existing caulk as long as the old caulk is clean and in good condition. It is important to ensure that the surfaces are dry and free of debris before applying the new caulk.
Yes, caulk is waterproof.
To re-caulk a tub effectively, follow these steps: Remove old caulk using a caulk removal tool. Clean the area with a mildew remover and let it dry completely. Apply new caulk in a continuous bead using a caulk gun. Smooth the caulk with a wet finger or caulk tool. Let the caulk dry for at least 24 hours before using the tub.
Yes, this is alright as long as the hose from the washer doesn't fit tightly into the pipe. There has to be a little room for air to get in so that the drain will vent.