Higher the glass transition temperature of the polystyrene can be attributed to the fact that sterically rigid bulky aromatic moieties like benzene in the styrene compared to that of aliphatic polypropylene
Transition piece is mostly used where there is variation of Wall thickness greater tha 3/16" or the yield strength difference is greater than 20 ksi.
Condensation Increases with relative HUMIDITY.
The 54 series are military specification versions with a greater operating temperature range.
Need to know the pipe diameter. 3 inch is the diameter of the galvanized pipe what is the working pressure of the pipe
The decay rates of organic materials increase with temperature. Materials with a greater thermal stability will remain unchanged for a longer time.
Fish oil contains compounds called hydrocarbons, which are known to have a solvent effect on polystyrene. When fish oil comes in contact with polystyrene, the hydrocarbons can break down the bonds holding the polystyrene together, causing it to dissolve.
Polystyrene (especially the expanded "Styrofoam (R)" type) is a good insulator. Metals are good conductors of heat.The insulating cup will maintain a greater heat differential than the conductor so if there is a liquid in the cup that is at a greater temperature than the surroundings, the metal cup will loose more heat than the polystyrene cup.
Polyethylene is typically stronger than polystyrene. It has greater tensile strength, impact strength, and resistance to tearing and cracking compared to polystyrene. These properties make polyethylene a popular choice for a wide range of applications where strength is important.
Transition piece is mostly used where there is variation of Wall thickness greater tha 3/16" or the yield strength difference is greater than 20 ksi.
This statement is incorrect. Inner transition elements are a subset of transition elements, and they refer specifically to the lanthanides and actinides series. There are more transition elements (d-block elements) than inner transition elements in the periodic table.
Unfilled polystyrene is also known as crystal polystyrene (PS) or general purpose polystyrene (GPPS). However, since crystal polystyrene is brittle, other polymers are added to polystyrene to improve its strength, and copolymers are formed as a result. One such copolymer is high impact polystyrene (HIPS), which is produced by adding polybutadiene rubber to polystyrene during the polymerization process. HIPS is tougher and has a greater impact strength than unfilled polystyrene. There are different types of polystyrene. Extruded polystyrene (XPS) is one form of the polymer that has high tensile strength, with good elasticity. It is commonly known as Styrofoam™. The other common form of polystyrene is expanded polystyrene (EPS). Both EPS and XPS are made from similar materials but there are difference between the two. XPS has a higher density as compared to EPS, due to the absence of air passages between its cells. The higher density makes XPS more rigid and strong. Also, XPS is waterproof and is an effective thermal insulator. Read more in the related link.
Polypropylene can be biodegradable if it is made with EBD (enhanced bio decompositions) which can be easily broken down, fairly quickly, back to base compounds. A variety of packaging can now use biodegradable polypropylene.
If the house temperature inside is greater than the temperature outside the house, then yes. If the temperature outside the home is greater than the temperature inside of the home, then no.
A density greater than that of water (which varies with temperature).
Thermal Energy.
High temperature makes the volume greater.
When their temperature is greater than the temperature of the adjacent zones.